To Next PageTo Next Page
Need help?Do you have a question about the Craftsman BRUSHWACKER 358.798260-32cc and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 32cc |
| Cutting Width | 17 inches |
| Product Type | Brush Cutter |
| Model Number | 358.798260 |
| Brand | Craftsman |
| Product Name | BRUSHWACKER |
General safety precautions for the operator of the tool.
Safety guidelines for tool maintenance and condition checks.
Precautions for handling, mixing, and storing fuel safely.
Safety procedures to follow during cutting operations.
Safe practices for moving and storing the unit.
Overview of the tool's features, design, and capabilities.
Steps for removing and checking product contents from the carton.
List of items included in the product packaging.
Guide to using included hardware during assembly.
Steps to prepare before assembling the tool.
Detailed instructions for assembling the tool's components.
Instructions for connecting and adjusting the throttle cable.
Steps for attaching and positioning the handlebar.
Information on the type of gasoline required for the engine.
Guidance on using fuel stabilizer for storage.
Recommended engine oil and its specifications.
Instructions on how to mix fuel and oil correctly.
Table showing correct fuel-to-oil ratios.
Pre-start checks and safety procedures.
Procedure for starting a cold or recently run engine.
Procedure for starting a warm engine.
Steps to start an engine that may be flooded.
Essential safety precautions when using the blade.
How to prevent and react to blade thrust incidents.
Safety procedures to follow while cutting with the blade.
Safety guidelines for operating the line trimmer.
Warnings about objects thrown by the trimmer line.
Defining the safe operating distance for line trimming.
Precautions regarding damaged trimmer head parts.
How to advance the trimmer line for optimal cutting.
Techniques for effective cutting with the line trimmer.
Instructions for replacing trimmer line.
Steps for replacing the trimmer line spool.
How to wind new line onto the spool.
Common issues and solutions for the trimmer head.
Safety rules for maintaining the tool.
Procedure for lubricating the flexible drive shaft.
Common engine performance issues and troubleshooting.
Recommended initial settings for the carburetor.
Step-by-step guide for performing carburetor adjustments.
Verifying engine's return to idle speed.
Adjusting the low speed mixture screw.
Adjusting the high speed mixture screw.
How to properly reinstall the air filter cover.
Steps for preparing the unit for long-term storage.
Engine-specific preparation for storage.
Additional storage considerations for the unit.
