Craftsman BV225 User Manual (English)

Questions and Answers:

M
Monica ChapmanAug 12, 2025
What to do if my Craftsman Blower engine will not start?
- N
  Nicole WhiteAug 12, 2025
  If your Craftsman Blower engine won't start, it could be due to several reasons: * The fuel tank might be empty, in which case you should fill it with properly-mixed fuel. * You may not have pressed the primer bulb enough; try pressing it 10 times or until fuel is visible. * The engine could be flooded; move the choke lever to Position 3, squeeze the throttle control, and pull the starter rope until the engine starts. * The fuel might be old (over 30 days) or improperly mixed; drain the fuel tank and add fresh, properly-mixed fuel. * The spark plug could be fouled; replace it.
M
Monica DavisAug 18, 2025
Why does my Craftsman BV225 engine lack power or stalls?
- C
  caseykyleAug 18, 2025
  If your Craftsman Blower engine lacks power or stalls, several factors could be responsible: * The fuel might be old (over 30 days) or improperly mixed. In this case, drain the fuel tank and add fresh, properly-mixed fuel. * A dirty air filter could be the culprit. Clean or replace the air filter. * A fouled spark plug can also cause this issue, so replace the spark plug.
O
ocastroAug 26, 2025
What to do if my Craftsman Blower engine will not idle?
- T
  tamarastewartAug 27, 2025
  If your Craftsman Blower engine will not idle, it could be due to a few reasons. A dirty air filter can cause this, so clean or replace it. Also, old or improperly mixed fuel (over 30 days old) can be the problem; drain the fuel tank and add fresh, properly-mixed fuel. Finally, the idle speed might be incorrect, so you may need to adjust the idle speed.
M
marshalldanielleSep 2, 2025
How to fix a Craftsman Blower engine that will not accelerate?
- D
  Darren HamptonSep 2, 2025
  If your Craftsman Blower engine will not accelerate, it might be due to old or improperly mixed fuel (over 30 days old); drain the fuel tank and add fresh, properly-mixed fuel. Another possible cause is a dirty air filter, so clean or replace it.