Craftsman C459-60134 User Manual (English)

Questions and Answers:

J
Jeremy LawsonAug 13, 2025
What to do if my Craftsman Tractor engine fails to start?
- B
  Brendan WilsonAug 13, 2025
  If your Craftsman Tractor engine fails to start, first ensure the PTO/Blade Engage lever is disengaged (OFF). Engage the parking brake. Check that the spark plug wires are connected to the spark plugs. Position the Throttle/Choke lever into the FAST position and move the Throttle/Choke lever into the Choke position. Also, verify that the fuel tank has clean, fresh gas (less than 30 days old).
T
Theresa ZhangAug 16, 2025
Why does my Craftsman Tractor engine run erratically?
- M
  Martin GarciaAug 16, 2025
  If the Craftsman Tractor engine runs erratically, first, deactivate the CHOKE. Ensure spark plug wires are securely connected. Replace the fuel line, fill the tank with clean, fresh gasoline, and replace the fuel filter. Clear the vent in the gas cap; if damaged, replace the cap. Drain the fuel tank and refill it with clean, fresh gasoline. Replace the air cleaner paper element or clean the foam pre-cleaner, if your tractor is equipped with one.
D
Danielle PatelAug 20, 2025
Why does my Craftsman C459-60134 Tractor have an uneven cut?
- L
  Latasha BauerAug 20, 2025
  If your Craftsman Tractor provides an uneven cut, perform a side-to-side deck adjustment to level the deck properly. Sharpen or replace the blade if it is dull. Check the tire pressure in all four tires to ensure they are even.
R
Robert FoxAug 25, 2025
How to improve mulching on my Craftsman Tractor?
- C
  Corey AndersonAug 25, 2025
  If your Craftsman Tractor is not mulching grass effectively, ensure the throttle is in the FAST (rabbit) position. Avoid mulching when the grass is wet. If the grass is excessively high, mow once at a high cutting height, then mow again at the desired height, or reduce the cutting swath. Sharpen or replace the blade if it is dull.
T
Thomas MarshAug 27, 2025
Why is my Craftsman C459-60134 Tractor engine overheating?
- K
  Katrina CampbellAug 27, 2025
  If your Craftsman Tractor is overheating, check the engine oil level and fill the crankcase with the proper amount and weight of oil. Also, clean any grass clippings and debris from around the engine’s cooling fins and housing to ensure proper airflow.
M
murraylisaAug 31, 2025
What to do if my Craftsman C459-60134 has excessive vibration?
- P
  pvargasAug 31, 2025
  If you notice excessive vibration in your Craftsman Tractor, tighten the blade and spindle if the cutting blade is loose. If the cutting blade is damaged or bent, replace it.
D
Derrick MunozSep 4, 2025
Why does my Craftsman C459-60134 engine idle rough?
- A
  Amy WhiteSep 4, 2025
  If your Craftsman Tractor engine idles roughly, replace the spark plug and set the plug gap correctly. Also, replace the air cleaner element and/or clean the pre-cleaner.
D
Dawn KingSep 8, 2025
What to do if my Craftsman Tractor engine hesitates at high RPM?
- T
  Timothy GibsonSep 8, 2025
  If your Craftsman Tractor engine hesitates at high RPM, remove the spark plug and reset the gap.

Craftsman C459-60134 Specifications

General

Engine	Briggs & Stratton
Deck Width	42 inches
Blades	2
Drive Type	Rear-wheel drive
Cutting Height	1.5 - 4 inches

Summary

MODEL NUMBER

SAFETY INSTRUCTIONS

general operation

Read and follow all safety rules and operating instructions before assembly and use.

slope operation

Exercise extreme caution on slopes; avoid slopes over 15 degrees.

Children and Towing Safety

Warnings regarding children, towing, and safe gasoline handling.

General Service and Engine Safety

Safety guidelines for servicing, engine modifications, and emissions.

Safety Symbols and Guides

Explanation of safety symbols and use of the slope guide.

ASSEMBLY

Tractor Set-Up

Initial steps for preparing the tractor and removing shipping restraints.

Connecting the Battery Cables

Essential steps for connecting the tractor's battery.

Checking Tire Pressure

Procedure to check and adjust tire pressure before operation.

Adjusting the Seat

How to adjust the tractor seat for proper operator positioning.

Setting the Deck Gauge Wheels and Roller

Adjusting deck gauge wheels and rollers for proper cutting height.

Gasoline and Oil

Instructions for correctly fueling and checking engine oil.

KNOW YOUR MOWER

Brake Pedal

Location and function of the brake pedal for stopping and parking.

Throttle Control Lever

Description of the throttle lever for engine speed control.

Seat Adjustment Lever

How to adjust the operator's seat position.

Deck Lift Lever

Operation of the lever to adjust cutting deck height.

Ignition Switch Module

How to start, stop, and operate the engine using the ignition switch.

Drive and Reverse Pedals

Function of the drive and reverse pedals for tractor movement.

Systems Indicator Monitor/Hour Meter LCD

Understanding the tractor's status indicators and operating hours.

PTO (Blade Engage) and Oil/Battery Indicators

Interpreting PTO, oil, and battery warning lights.

PTO / Blade Engage Knob

Procedure for engaging and disengaging the PTO for attachments.

Parking Brake/Cruise Control Lever

Operation of the lever for parking brake and cruise control.

OPERATION

Safety Interlock System

Explanation of safety features preventing operation under unsafe conditions.

Starting the Engine

Step-by-step guide to safely start the tractor's engine.

Stopping the Engine

Proper procedure for safely shutting down the tractor's engine.

Driving The Tractor

Instructions for operating the tractor in forward and reverse.

Reverse Caution Mode

Using the mode that allows mowing in reverse with PTO engaged.

Driving On Slopes

Critical safety guidelines for operating the tractor on inclines.

Engaging the Parking Brake/Setting the Cruise Control

How to engage the parking brake and set cruise control.

Cruise Control Operation

Instructions for setting and disengaging cruise control.

Mowing Procedures

Best practices for mowing lawns effectively and safely.

Using the Deck Lift Lever

How to operate the deck lift lever for desired cutting height.

SERVICE AND MAINTENANCE

Maintenance Schedule

Recommended service tasks and their frequency for optimal performance.

Cutting Deck Removal

Step-by-step guide for removing the tractor's cutting deck.

Changing the Deck Belt

Procedure for replacing the cutting deck drive belt.

Cutting Blades Maintenance

Instructions for sharpening, balancing, and replacing cutting blades.

Battery, Fuse, and Tire Service

Procedures for battery charging, fuse checks, and tire maintenance.

Cleaning and Lubrication

Guidelines for cleaning the tractor and lubricating key points.

Adjustments and Leveling

Instructions for adjusting deck, parking brake, and seat positions.

Steering and Roller Adjustments

Procedures for adjusting steering alignment and deck rollers.

Engine Oil Service

How to check and change the engine oil for proper lubrication.

Air Cleaner, Spark Plug, and Fuel Filter Maintenance

Procedures for servicing air cleaner, spark plug, and fuel filter.

Fuel Filter Replacement and Muffler Care

Steps for replacing fuel filter and maintaining the muffler.

OFF-SEASON STORAGE

Engine and Tractor Preparation for Storage

Procedures for preparing the engine and tractor for long-term storage.

TROUBLESHOOTING

PARTS LIST

Steering and Axle Components

List of components for the steering and axle assembly.

Hood and Dash Components

List of components for the hood and dashboard.

Seat and Fender Components

List of components for the seat and fender assembly.

Drive and Wheel Components

List of components for drive system and wheels.

Engine Related Parts

List of parts related to the engine accessories.

PTO and Battery Components

List of components for the PTO clutch and battery system.

Deck Components

List of parts associated with the cutting deck.

Labels

WARRANTY STATEMENT

EMISSION CONTROL WARRANTY

YOUR WARRANTY RIGHTS AND OBLIGATIONS

Outlines owner's obligations and rights under the warranty.

MANUFACTURER’S WARRANTY COVERAGE

Specifies covered parts and warranty period for emission systems.

OWNER’S WARRANTY RESPONSIBILITIES

Details the owner's responsibilities for maintaining the engine.

GENERAL EMISSIONS WARRANTY COVERAGE

States warranty coverage for emission-related parts.

WARRANTED PARTS

Lists components covered under the emission warranty.

Emissions Durability and Air Index

REPAIR PROTECTION AGREEMENT

NOTES

Related product manuals