Craftsman CMEG100 User Manual

final page size: 8.5 x 5.5 in CRAFTSMANfinal page size: 8.5 x 5.5 in CRAFTSMAN
6.0 A 4-1/2" (114 mm) Small Angle Grinder
Meuleuse à petit angle 114 mm (4-1/2 po) 6,0 A
Esmeriladoras Angulares Pequeñas de 114 mm
(4-1/2") 6,0 A
CMEG100
INSTRUCTION MANUAL | GUIDE D’UTILISATION | MANUAL DE INSTRUCTIONES
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTSMAN.COM

Craftsman CMEG100 Specifications

General

Type	Angle Grinder
No Load Speed	12, 000 RPM
Wheel Diameter	4.5 inches
Power Source	Corded Electric
Voltage	120V
Disc Diameter	4.5 inches
Arbor Size	5/8 inches
Spindle Thread	5/8-11

Summary

Safety Alert Symbols and Words

Product Components Overview

Identifies and illustrates the main parts of the angle grinder.

General Power Tool Safety Warnings

Work Area and Electrical Safety

Guidelines for a safe work environment and electrical precautions.

Personal Safety and Tool Handling

Personal protective measures and safe operating practices for tool use.

Power Tool Use and Care Guidelines

Proper usage, maintenance, and storage instructions.

Safety Instructions for All Operations

Grinding, Sanding, Wire Brushing, Cutting-Off Safety

Safety warnings specific to grinding, sanding, wire brushing, and cutting.

Kickback and Related Warnings

Grinding and Abrasive Cutting-Off Safety

Specific safety warnings for grinding and cutting operations.

Sanding and Wire Brushing Safety

Additional Safety Warnings and Precautions

Important additional safety advice and warnings.

Components and Intended Use

Safety Information: Dust, Noise, Extension Cords

Safety advice on dust, noise exposure, and extension cord usage.

Attaching Auxiliary Handle and Guards

Mounting Wheels and Accessories

Steps for mounting non-hubbed wheels and accessories.

Mounting Hubbed Wheels and Wire Brushes

Mounting Sanding Backing Pads

Steps for mounting sanding backing pads.

Operation Procedures

Hand Position, Switches, and Spindle Lock

Guidance on proper hand placement, switch, and spindle lock use.

Surface Grinding, Sanding, Wire Brushing Safety

Safety for specific operations including dust build-up.

Precautions for Painted Workpieces

Edge Grinding and Cutting Safety

Warnings and precautions for edge grinding and cutting.

Maintenance and Accessories

Versatrack™ System, Repairs, and Registration

Information on Versatrack, repairs, and online product registration.

Warranty and Troubleshooting

Accessories Chart