To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMPBN18SB and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Weight | 4.1 lbs |
| Fastener Type | Brad Nails |
| Battery Type | Lithium Ion |
| Nail Gauge | 18 gauge |
| Nail Length | 5/8 - 2 in |
Lists and illustrates the parts of the pneumatic finish tools.
Provides critical warnings regarding tool operation, eye protection, and air supply.
Details further safety precautions for tool use, handling, and electrical hazards.
Outlines dimensions, weight, gauge, and fastener range for the tools.
Details air hose requirements, fittings, and supply source recommendations.
Covers safe operation procedures and correct hand placement for tool usage.
Step-by-step instructions for loading fasteners into both tool models.
Describes the sequential trip trigger mechanism and its proper use.
Procedure to verify the tool functions correctly and safely before use.
How to adjust the fastener drive depth using the adjustment wheel.
Guidelines for using the tool in freezing temperatures and proper procedures.
Covers general maintenance, seal assembly, and air supply volume considerations.
Information on recommended accessories and the Versatrack™ mounting system.
Procedures for cleaning the tool and guidelines for performing repairs.
Details the three-year limited warranty, coverage, and limitations.
Information on the 90-day money back guarantee for unsatisfied customers.
Instructions on how to obtain replacement warning labels if needed.
