To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMXECXM331 and is the answer not in the manual?
General| Model | CMXECXM331 |
|---|---|
| Type | Portable |
| Power Source | Electric |
| Motor Type | Induction |
| Voltage | 120V |
| Pump Type | Oil-free |
| Noise Level | 78 dBA |
Explains the meaning of safety alert symbols and words used in the manual.
Highlights critical safety instructions for operation and maintenance.
Explains risks from sparks and poor ventilation, and prevention methods.
Warns about hearing loss and recommends protective equipment.
Alerts to lead content and harmful vapors from dust/sprays.
States compressed air is unsafe for breathing without proper filtration.
Details air tank safety, lifespan, and risks of rupture due to corrosion.
Discusses electrical hazards, grounding, and the need for qualified repairs.
Alerts to hazards from high-speed compressed air propelling debris.
Warns against touching hot compressor parts to prevent burns.
Advises that the compressor is heavy and requires assistance for lifting.
Warns about serious injury from contact with moving components.
Warns against operating with damaged parts or improper procedures.
Advises against operating on elevated surfaces to prevent falls.
Emphasizes turning off power and bleeding pressure before adjustments.
Provides guidance on setting up and locating the air compressor.
Details the critical steps for proper electrical grounding.
Specifies requirements for using extension cords with the compressor.
Outlines voltage, circuit, and protection requirements.
Emphasizes understanding the manual and safety before operating.
Advises reading the manual to understand controls and adjustments.
Step-by-step guide to start the air compressor and build pressure.
Instructions for properly shutting down and unplugging the unit.
Essential checks and preparations before operating the compressor.
Warnings regarding hose whip, accessory condition, pressure limits, and air quality.
Emphasizes safety precautions before performing maintenance.
Outlines routine checks for safety valve, drain tank, and service.
Procedure to test the safety valve for proper operation.
Step-by-step guide to drain condensation from the air tank.
Warns about high pressure, noise, and tank corrosion from water.
Guidance on cleaning air vents and non-metallic parts safely.
Advises professional servicing and use of identical replacement parts.
Steps for preparing the compressor for storage, including draining.
Warns about water condensation causing tank rupture during storage.
Details warranty period and what is covered for oil-free compressors.
Lists items and conditions not covered by the warranty.
Explains the process and requirements for obtaining warranty service.
Addresses safety valve issues when tank pressure is too high.
Guides on identifying and fixing air leaks at fittings or the tank.
Covers causes for insufficient air supply and pressure drops.
Troubleshoots issues with continuous air leaks or failure to shut off.
Addresses causes like blown fuses, tripped breakers, or faulty motors.
Covers problems related to extension cord length, gauge, or connections.
