Do you have a question about the Craftsman CMXEVCVVJH1612 and is the answer not in the manual?
Model Number | CMXEVCVVJH1612 |
---|---|
Type | Wet/Dry Vacuum |
Tank Capacity | 16 Gallons |
Peak Horsepower | 6.5 HP |
Voltage | 120V |
Amps | 12 A |
Hose Length | 7 ft |
Cord Length | 20 ft |
Filter Type | Qwik Lock Filter |
Included Accessories | Wet nozzle, utility nozzle |
This section defines the safety alert symbols and words used in the manual to communicate potential hazards and risks.
Warning against operating the vacuum near flammable materials or vapors that could cause fire or explosion.
Emphasizes the importance of reading and understanding the operator's manual and all labels before use.
Prohibits vacuuming lead paint debris, silica, or toxic materials due to health risks.
Clarifies that the vacuum is not intended for filtering pathogens like COVID-19; follow general cleaning guidance.
Advises users to save the manual for future reference to ensure safe operation.
Guidance on servicing, emphasizing the use of identical replacement parts and repairing damaged cords.
Information on polarized plugs and precautions to avoid electric shock, including not altering the plug.
Table detailing the required AWG wire size for extension cords based on length and ampere rating.
A safety reminder to verify the power cord is disconnected from the outlet before starting the unpacking process.
Detailed steps for attaching the caster feet to the collection tank for stability.
Steps to prepare the vacuum cleaner for dry pick-up operations.
Instructions for preparing the vacuum cleaner for wet pick-up operations, including filter changes.
Guidance on utilizing the vacuum cleaner's blowing capabilities.
Essential safety measures when using the blower, including wearing safety goggles and keeping bystanders clear.
Steps to configure the vacuum for blower operation, including hose and tank preparation.
Crucial notice emphasizing the use of the correct cartridge filter for dry vacuuming to prevent motor damage.
A safety warning to ensure the power cord is unplugged before performing cartridge filter installation.
Step-by-step instructions for correctly installing the cartridge filter onto the filter cage.
Procedure for unlocking and removing the filter retainer and the cartridge filter.
Guidance on cleaning the cartridge filter, with a caution for outdoor cleaning and recommendation for replacement.
Instructions on how to safely empty dry waste from the vacuum's collection tank.
Important advice for vacuuming liquids, including nozzle gap for air inflow and float valve function.
Critical warnings for wet pick up, including shutting off, unplugging, draining, and cleaning after use.
Detailed steps for properly installing the foam wet filter over the filter cage.
Instructions for washing the foam wet filter with mild soap and water, and rinsing it.
Process for draining liquids from the collection tank and refitting the drain cap.
Guidelines for storing the vacuum cleaner indoors, including hose and accessory placement.
Explanation of advantages of registering the product, such as warranty service and ownership confirmation.
Information on the 3-year limited warranty, 90-day money-back guarantee, and free label replacement.
Addresses potential causes like no power supply or faulty cords, and provides corresponding solutions.
Explains dust emission due to filter use with fine dust and suggests appropriate filter changes.
Covers reduced efficiency or motor vibration, identifying causes like blockages or clogged filters.