EasyManua.ls Logo

Craftsman CMXGVAM1144036 - User Manual

Craftsman CMXGVAM1144036
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL | MANUAL DE INSTRUCCIONES
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1-888-331-4569 WWW.CRAFTS MA N.COM
Form No. 769-18330
(September 25, 2018)
Rear Tine CRT Tiller
Cultivadora de dientes trasero
CMXGVAM1144036
CMXGVAM1144037

Table of Contents

Questions and Answers

  • S
    Sara OrtizAug 12, 2025
    Why won't the wheels or tines turn on my Craftsman Tiller?
    • G
      Glenda PerezAug 12, 2025
      If the wheels or tines on your Craftsman Tiller aren't turning, it could be due to a few reasons. First, make sure you're using the controls correctly. You may need to review the operation section of your manual. It's also possible that the drive belts are worn, broken, or mis-adjusted, in which case you should replace or adjust them. Another cause can be that the bolt is loose in the transmission pulley, so check and tighten it. If none of these steps work, there may be internal transmission damage, and you should contact your local authorized dealer.
  • E
    Erica AndersonAug 19, 2025
    What to do if the tines turn, but wheels don’t on my Craftsman Tiller?
    • O
      Omar BlankenshipSep 12, 2025
      If your Craftsman Tiller's tines are turning but the wheels aren’t, it might be because the wheel drive pins aren't properly inserted in WHEEL DRIVE, so ensure they are correctly inserted. Another potential cause is a loose bolt in the transmission pulley; try tightening it. If neither of these solutions works, it could be due to internal transmission wear or damage, in which case you should contact your local authorized dealer.
  • C
    carlos81Aug 27, 2025
    What to do if wheels turn, but tines don’t on my Craftsman Tiller?
    • K
      Kayla BishopAug 27, 2025
      If the wheels on your Craftsman Tiller are turning but the tines aren't, it could be due to missing tine holder mounting hardware, so replace the hardware. Another possible reason is a loose bolt in the transmission pulley, so try tightening the bolt. If these steps don't resolve the issue, there may be internal transmission wear or damage, and you should contact your local authorized dealer.
  • B
    Bradley HoSep 4, 2025
    How to improve poor tilling performance of my Craftsman CMXGVAM1144036?
    • C
      Crystal StewartSep 4, 2025
      Poor tilling performance with your Craftsman Tiller can be attributed to several factors. Check the tines for wear and replace them if needed. Also, double-check the depth regulator setting. Another cause may be a slipping forward drive belt.

Craftsman CMXGVAM1144036 Specifications

General IconGeneral
Engine Type4-Cycle
Engine Displacement208 cc
Tilling Width18 in.
Tilling Depth8 inches
Weight85 lbs
Forward RotationYes
Reverse RotationYes
Self-PropelledNo
Warranty2 years
Forward RotationsYes

Related product manuals