To Next PageTo Next Page
Need help?Do you have a question about the Craftsman EZ3 917.272021 and is the answer not in the manual?
General| Engine | Briggs & Stratton |
|---|---|
| Cutting Width | 21 inches |
| Engine Type | 4-Cycle |
| Deck Material | Steel |
| Starter Type | Recoil |
| Oil Capacity | 20 oz |
| Engine Power | 6.75 ft-lbs Torque |
| Cutting Height | 1.25 to 3.75 inches |
| Wheel Size | 8 inches (front), 11 inches (rear) |
| Fuel Tank Capacity | 1.6 quarts |
Lists key sections of the manual for safe operation and maintenance.
Emphasizes reading safety rules before operating the equipment.
Provides guidelines for safe operation on slopes, including DOs and DO NOTs.
Details safety precautions regarding children and operating the machine.
Explains the meaning of the CAUTION symbol for safety precautions.
Alerts about chemicals in engine exhaust known to cause cancer or birth defects.
Lists the necessary tools for assembling the tractor.
Instructions on how to unpack the tractor from its shipping carton.
Steps to prepare the tractor for removal from the shipping skid.
Instructions for checking and preparing the tractor battery.
Steps for installing and adjusting the tractor seat for optimal comfort.
Guidance on setting the correct tire pressure for optimal performance.
Instructions to verify proper brake system adjustment.
Detailed steps for installing the mower deck and drive belt.
Explains how to properly level mower deck for best cutting results.
Verifies that all belts are correctly routed around pulleys and keepers.
Instructions for attaching the mulcher plate to the mower deck.
Steps to switch between mulching, bagging, or discharging grass clippings.
A final checklist to review before operating the tractor after assembly.
Explains the meaning of various symbols used on the tractor and in its literature.
Describes the function of the switch used to engage mower blades or attachments.
Explains how to turn headlights on and off.
Details how to control engine speed and use the choke.
Explains the dual function of the pedal for declutching, braking, and starting.
Describes the control for disengaging the transmission for pushing or towing.
Explains how to adjust the mower's cutting height.
Explains how to select speed and direction of the tractor.
Explains how to raise and lower mower decks or other attachments.
Describes the plunger used to release the attachment lift lever.
Explains how to start and stop the engine.
Indicates battery charging status.
Explains how to lock the clutch/brake in the brake position.
Step-by-step guide to engaging the parking brake.
How to stop mower blades by disengaging the attachment clutch.
How to stop tractor's ground drive using clutch/brake pedal and motion control.
Recommends operating the engine at full throttle for optimal performance.
Explains how motion control lever dictates tractor movement.
How to adjust cutting height using the adjustment knob.
How to adjust gauge wheels for proper deck positioning and scalping prevention.
Steps for operating the mower, including selecting height and engaging blades.
Safety guidelines and procedures for operating the tractor on slopes.
Instructions for safely pushing or towing the tractor.
Advice on towing attachments safely and responsibly.
Pre-start checks and procedures before operating the engine.
How to check and add engine oil to the correct level.
Guidelines for adding fresh, clean gasoline to the fuel tank.
Procedures for starting the engine, including cold and warm weather conditions.
Specific steps for starting the engine in warmer temperatures.
Specific steps for starting the engine in colder temperatures.
How to warm up the transmission before driving in cold weather.
Essential procedure to remove trapped air from the transmission before operation.
Specific tips for effective mulching of grass clippings.
A detailed schedule of regular maintenance tasks and intervals.
General advice on maintaining tractor and warranty considerations.
Checks to perform before each operation of the tractor.
Visual guide showing lubrication points and types of lubricants.
How to check and adjust brake system.
Recommendations for maintaining tire pressure and care.
Explains function and importance of operator presence systems.
Advice on keeping blades sharp and replacing damaged ones.
Step-by-step instructions for removing mower blades.
Guidance on sharpening and balancing blades.
Information on tractor's battery and charging system.
Steps for cleaning battery terminals to prevent power loss.
Maintenance checks for V-belts and their replacement.
How to maintain clean cooling fins for the transmission.
Information regarding transaxle fluid maintenance.
Guidelines for selecting and changing engine oil.
How to clean air screen to prevent overheating.
Importance of keeping cooling areas clean.
Maintenance procedures for air filter.
How to clean and oil foam pre-cleaner.
How to service or replace paper air filter cartridge.
When and how to replace engine oil filter.
Inspection and replacement of muffler and spark arrester.
Recommendations for replacing spark plugs.
How and when to replace in-line fuel filter.
General precautions before performing service or adjustments.
Step-by-step instructions for removing mower deck.
Reference to installation procedure in Assembly section.
Detailed instructions for leveling mower housing for optimal cutting.
How to adjust mower deck side-to-side.
How to adjust mower deck front-to-back.
Instructions for removing and installing mower drive belt.
How to adjust brake system for proper stopping distance.
Instructions for removing and installing motion drive belt.
How to adjust friction pack for motion control lever.
How to adjust steering wheel alignment if needed.
Steps to remove wheel for repair.
Procedures for starting tractor using jumper cables.
Instructions for safely removing and installing battery.
How to replace burnt-out headlight bulb.
Importance of checking wiring related to interlocks and relays.
How to replace a blown fuse.
Steps for removing hood and grill for access.
How to adjust throttle control cable if necessary.
Detailed instructions for adjusting engine carburetor for optimal performance.
How to test and adjust engine acceleration.
Steps for preparing tractor itself for storage.
How to prepare battery for long-term storage.
Procedures for preparing fuel system for storage to prevent gum deposits.
How to change engine oil before storage.
Steps to protect engine cylinder during storage.
Additional tips for storing tractor and related items.
Exploded view and part numbers for wheels and tires.
Exploded view diagram of engine crankcase components.
List of engine crankcase parts with their corresponding part numbers.
Exploded view of blower housing and baffle parts.
Exploded view of air intake and filter components.
Exploded view diagram of engine control components.
Exploded view diagram of engine oil pan and lubrication components.
List of engine control parts with their corresponding part numbers.
List of oil pan and lubrication parts with their corresponding part numbers.
Exploded view of exhaust system components.
Exploded view of fuel system components.
List of crankshaft parts with their corresponding part numbers.
List of exhaust system parts with their corresponding part numbers.
