To Next PageTo Next PageWhy won't my Craftsman PRO Turn Tight 247.204420 engine start?
If your Craftsman Lawn Mower engine won't start, try these steps: * Ensure the PTO/Blade Engage knob is disengaged (OFF). * Engage the parking brake. * Check the spark plug wire is connected. * Position the throttle lever to FAST. * Refill the fuel tank with fresh gas (less than 30 days old). * Replace the fuse if it's blown.
What to do if my Craftsman Lawn Mower is making an uneven cut?
If your Craftsman Lawn Mower's cut is uneven, make sure the deck is leveled properly by performing a side-to-side deck adjustment. Sharpen or replace the blade if it's dull. Check and correct the tire pressure in all four tires.
How to fix a Craftsman Lawn Mower that idles poorly?
If your Craftsman Lawn Mower engine idles poorly, replace the spark plug and adjust the gap if it is fouled. Also, clean or replace the air cleaner element and/or clean the pre-cleaner if it is dirty.
Why is my Craftsman PRO Turn Tight 247.204420 engine running erratically?
If your Craftsman Lawn Mower engine is running erratically, check the following: * Ensure the electric choke is working properly. * Connect and tighten any loose spark plug wires. * Replace the fuel line if it's blocked or if the fuel is stale. Refill with fresh gasoline and replace the fuel filter. * Clear the vent in the gas cap, or replace the cap if it's damaged. * Drain the fuel tank and refill with fresh gasoline if there's water or dirt in the system. * Clean or replace the air cleaner.
What causes excessive vibration in my Craftsman PRO Turn Tight 247.204420 Lawn Mower?
To troubleshoot excessive vibration in your Craftsman Lawn Mower, check if the cutting blades are loose or unbalanced and tighten the blade and spindle and balance the blade. Also, examine the cutting blade for damage, dullness, or bending, and replace it if necessary.
Why is my Craftsman PRO Turn Tight 247.204420 Lawn Mower engine overheating?
If your Craftsman Lawn Mower engine overheats, make sure the engine oil level is at the correct level with the proper type of oil. Also, clean any grass clippings and debris from around the engine’s cooling fins and blower housing to ensure proper airflow.
Why won't my Craftsman PRO Turn Tight 247.204420 mulch grass?
Your Craftsman Lawn Mower may not mulch grass effectively if the engine speed is too low; place the throttle control in the FAST position. Avoid mulching when the grass is wet. If the grass is excessively high, mow once at a high cutting height, then mow again at the desired height, or make a narrower cutting swath. Sharpen or replace the blade if it is dull.
General| Engine Brand | Briggs & Stratton |
|---|---|
| Turning Radius | 6 inches |
| Fuel Tank Capacity | 3 gallons |
| Deck Material | Steel |
| Engine Type | Gas |
| Cutting Height | 1.5-4 inches |
| Front Tire Size | 15x6 inches |
| Rear Tire Size | 20x8 inches |
Covers non-expendable parts for two years against defects in material or workmanship.
Covers the battery for 90 days against defects in material or workmanship.
Provides coverage for the frame (5 years) and front axle (10 years) against defects.
Details how to obtain free repair or replacement for warranty coverage.
Warns about chemicals in engine exhaust and battery components.
Provides essential rules for safe operation of the machine.
Details safe practices for operating the tractor on slopes to prevent tip-overs.
Emphasizes the dangers children face around the machine and safety measures.
Outlines precautions and guidelines for towing with the tractor.
Provides critical safety guidelines for handling gasoline to prevent fires and explosions.
General safety advice for cleaning, repair, and inspection of the tractor.
Warns against altering the engine or governor settings to prevent unsafe speeds.
Details requirements and availability of spark arrestors for safe operation.
Explains the meaning of various safety symbols found on the machine.
Warns to keep hands and feet away from rotating blades and ensures discharge cover is in place.
Alerts to fire risks from dry leaves, tall grass, and hot surfaces, advising machine cooling.
Instructions for preparing the tractor, including manual movement.
Detailed steps for installing the operator's seat onto the tractor.
Instructions for installing the discharge chute deflector and removing shipping braces.
Steps to install the front bumper using provided hardware.
Guide on how to adjust the operator's seat position for comfort and safety.
Step-by-step instructions for connecting the tractor's battery cables safely.
Information on fuel tank capacity, type of gasoline, and checking engine oil level.
Instructions for setting deck wheel height for anti-scalp feature.
Description of the forward drive pedal's location and function for controlling speed.
Description of the reverse drive pedal's location and function for controlling speed.
Guide to starting and stopping the engine using the ignition switch.
Operation of the park brake and cruise control lever.
Details the safety interlock system and its importance for preventing accidents.
Step-by-step guide on how to safely start the tractor engine.
How to operate the tractor in reverse with blades engaged and safety precautions.
General guidance on driving the tractor, including speed and direction changes.
Critical safety instructions for operating the tractor on inclines.
Steps to engage and disengage the Power Take-Off for attachments.
Comprehensive guide on safe mowing practices, including slope and debris management.
A schedule outlining maintenance tasks based on operating hours or time intervals.
Detailed steps on how to safely change the engine oil, including warming the engine.
Instructions for cleaning the tractor, including using the Smart Jet system.
Steps to adjust the deck to be 1/4-3/8" lower at the front than the rear.
Steps to adjust the deck for even side-to-side cutting height.
How to adjust the deck height lever to ensure accuracy.
Safety warnings and procedures for jump starting the tractor battery.
Detailed steps for safely removing the cutting deck from the tractor.
Instructions for removing, sharpening, balancing, and replacing cutting blades.
Steps for changing the deck belt, emphasizing the use of factory-approved belts.
Guidelines for preparing and storing the riding mower for extended periods.
Steps to take to get the mower ready for use after storage.
Lists common causes and remedies for the engine not starting.
Identifies potential causes and solutions for erratic engine performance.
Causes and solutions for the engine overheating.
Reasons why the mower may not mulch grass and troubleshooting steps.
Outlines owner's rights and obligations regarding emission control system warranty.
Explains the warranty coverage for emission control parts.
Details the owner's responsibility for maintenance and presenting the equipment for service.
Lists specific emission control system parts covered under warranty.
Details the benefits of the Craftsman Repair Protection Agreement, including expert service and discounts.
