To Next PageTo Next Page
Need help?Do you have a question about the Craftsman T100 Series and is the answer not in the manual?
General| Turning Radius | 18 inches |
|---|---|
| Warranty | 2-year limited |
| Cutting Width | 42 inches |
| Fuel Capacity | 1.3 gallons |
| Cutting Height | 1.5 to 4 inches |
| Engine | Briggs & Stratton 675 Series |
Read, understand, and follow all instructions on the machine and in the manual.
Slopes are a major factor related to loss of control and tip-over accidents.
Tragic accidents can occur if the operator is not alert to the presence of children.
To avoid personal injury or property damage use extreme care in handling gasoline.
Before cleaning, repairing, or inspecting, make certain all moving parts have stopped.
Never operate mower deck without chute deflector installed and in the down position.
Connect POSITIVE (Red) wire first, then NEGATIVE (Black) wire to terminals.
Forward/Reverse pedals, Brake pedal, Throttle/Choke controls.
Procedures for turn-key ignition and PBS starting/stopping.
How to engage PTO for electric and manual systems.
Differential lock, seat adjustment, safety interlocks.
Detailed steps for starting and stopping the engine.
Allows driving in reverse with blades engaged via ignition or button.
Procedures for moving forward, reverse, and changing direction.
Guidelines for safe operation on inclines, including mowing patterns.
Move throttle to FAST, use switch/handle to engage power to deck/attachments.
Common causes and remedies for excessive vibration.
Reasons for an uneven cut and how to fix them.
