23
SERVICE AND MAINTENANCE
MAINTENANCE SCHEDULE
Interval Item Service Service Log
Each use 1. Engine intake screens and cooling
fans *
2. Exhaust manifold, muffler pipe and
muffler shields *
3. Check/Clean Hood/Dash Panel
Louvers *
4. Top and underside of deck, under and
around spindle covers and belt area *
5. Around fuses, wiring and wiring
harnesses *
6. Around transmission, axle and fans *
7. Engine Oil
8. Air Filter
1. Check/Clean
2. Check/Clean
3. Check/Clean
4. Check/Clean
5. Check/Clean
6. Check/Clean
7. Check (See engine manual)
8. Check (See engine manual)
After first 5 hours 1. Engine Oil 2. Change (break-in period). (See engine
manual)
Every 10 hours 1. Battery terminals
2. Hood/Dash panel louvers
3. Intake screen
4. Blades
5. Tires
6. Front wheels
7. Deck
1. Clean
2. Clean
3. Check/Clean
4. Check/Sharpen/Replace as needed
5. Check
6. Lube
7. Check/Clean
Every 25 hours 1. Deck wheels
2. Deck level/pitch
3. Lubrication points
1. Inspect and lube
2. Check
3. Grease
Every 50 hours 1. Belts and pulleys
2. Engine Oil
3. Oil Filter
4. Air Filter
5. Fuel Filter
1. Check for damage and wear
2. Change (See engine manual)
3. Replace (See engine manual)
4. Clean or change (See engine manual)
5. Replace (See engine manual)
Every 100 hours 1. Hardware
2. Spark plug condition/gap
1. Check and secure
2. Check (See engine manual)
Every season/Before storage 1. Engine Cooling Fans
2. Battery terminals
3. Lubrication points
4. Hood/Dash panel louvers
5. Intake screen
6. Blades
7. Tires
8. Deck
9. Deck wheels
10. Deck level/pitch\
11. Spark plug condition/gap
12. Engine Oil
13. Oil Filter
1. Check/Clean
2. Clean
3. Grease
4. Clean
5. Check/Clean
6. Check/Sharpen/Replace as needed
7. Check
8. Check/Clean
9. Inspect and lube
10. Check
11. Check (See engine manual)
12. Change (See engine manual)
13. Replace (See engine manual)
Miscellaneous 1. Valve lashing (camshaft/valve
clearance) ^
2. Check and adjust ^
*-- Perform more often in dry conditions and/or when mulching
^ -- Have this item performed by a qualified service dealer
WARNING
Before performing any type of maintenance/service, disengage all controls
and stop the engine. Wait until all moving parts have come to a complete
stop. Disconnect spark plug wire and ground it against the engine to prevent
unintended starting. Always wear safety glasses during operation or while
performing any adjustments or repairs.
Follow the maintenance schedule given below. This chart describes service guidelines
only. Use the Service Log column to keep track of completed maintenance tasks. To
locate the nearest authorized Service Center or to schedule service, call
the following toll free number: 1-888-331-4569.
Refer to the Engine Operator’s Manual for engine maintenance items listed in the table
below.
To Next Page
Loading...
Need help?
General
