EasyManua.ls Logo

Craftsman SB270 - Fast Start Guide - Engine Start; Fuel and Oil Preparation; Key Insertion; Choke Setting

Craftsman SB270
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
778-15058
A. Connect an extension cord
to the electric starter outlet.
B. Plug the other end of the
extension cord into a three-
prong 120-volt, grounded,
AC receptacle.
Push primer
three times.
Fill fuel tank with clean,
fresh gasoline. Do not fill
above the base of fuel
tank neck.
Pour the entire contents
of the oil bottle
(included in carton) into
the oil fill.
B. When engine starts,
slowly move choke
control into the Run
position.
C. Disconnect cord from
power receptacle first
and then from snow
thrower’s outlet.
A. To start engine,
push down
on starter button.
Insert the key into the key switch until the key
snaps into place. Do not turn the key!
Move the choke control
into the Choke position.
Electric Starter Outlet
Key
Choke Control
Electric Starter
Button
Primer
© 2018 2S5, 2T5 CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
Oil Fill
Fuel Fill
1
4
2
5
3
6
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
Fast Start Guide - Engine Start

Related product manuals