To Next PageTo Next Page
Need help?Do you have a question about the Craftsman Weedwacker 358.799080 and is the answer not in the manual?
General| Engine Type | 2-cycle |
|---|---|
| Displacement | 25cc |
| Fuel Mix Ratio | 40:1 |
| Weight | 10.5 lbs |
| Engine Displacement | 25cc |
| Shaft Type | Straight |
| Cutting Width | 17 inches |
| Cutting Swath | 17 inches |
| Handle Type | Loop |
Proper attire, staying alert, avoiding unintentional starting, and restricting unit use to informed individuals.
Using correct voltage, avoiding wet locations, using proper extension cords, and not attempting repairs.
Inspect unit before use, use correct parts, and ensure guards are in place.
Inspect cutting area, keep children and animals away, maintain balance, and keep head below waist.
Follow maintenance schedule, disconnect power before servicing, and keep unit clean.
Secure unit for transport, store unplugged in a safe, dry place away from children.
Trimmer line throws objects violently; keep people and animals 50 feet away and wear eye protection.
Read manual, follow all instructions, and be familiar with controls for safe operation.
Details on voltage, amperage, cutting path, line type, and weight of the electric weedwacker.
Adhering to safety rules, performing regular maintenance, and following manual instructions.
Details on warranty coverage, exclusions, and service availability for the electric weedwacker.
Lists safety goggles, spool with line, extension cord, and bulk line as available accessories.
Lists loose parts in the carton, removal instructions, and required tools for assembly.
Proper installation of the shield for operator protection and line limiting.
Guidelines for connecting the extension cord, including voltage, polarization, and gauge.
Final checks for fasteners, handle position, extension cord marking, and semi-automatic head security.
Familiarization with unit controls and adjustments before operation.
Explanation of the double insulation system for electrical shock protection.
Warning about objects thrown by the line and required safety measures.
Guidelines on protective gear, clothing, and operating when not fatigued or impaired.
Pre-operation checks for unit integrity, line type, head assembly, and accessories.
How to inspect areas, cut efficiently, maintain balance, and avoid contact with the spinning line.
Procedure to safely stop the unit by releasing the trigger switch.
Procedure to safely start the unit by squeezing the trigger switch.
Guidance on posture, hand placement, and unit orientation for safe operation.
Steps to adjust the assist handle for optimal comfort and control.
How to advance trimmer line using the semi-automatic head and avoid abrasive surfaces.
Caution against crowding line, damaging objects, and the risk of thrown debris.
Use the tip of the line for cutting, avoid forcing, and maintain unit speed.
Ideal for reaching tight spots; keep the line parallel to the ground.
Removes unwanted vegetation by striking the ground; note increased line wear.
Use fanning action for clean-up, keeping line parallel and above surfaces.
Checklist for pre-use and post-use maintenance tasks.
Warranty coverage exclusions and importance of regular maintenance.
Inspect for damaged/worn parts and loose fasteners on the head and shield.
Clean unit with a damp cloth, wipe dry, and keep air vents clear of debris.
Instructions for rewinding existing spool or installing a prewound spool, emphasizing correct line type.
Step-by-step guide for inserting and securing the spool onto the hub.
Preparing the unit for storage, cleaning, and storing in a suitable environment.
Identifies common symptoms, their causes, and recommended remedies for unit malfunctions.
Contact information for repair services and ordering replacement parts.
Provides contact details for customer support and assistance hours.
Information required when ordering parts, including product and model number.
