EasyManua.ls Logo

Craftsman WEEDWACKER 358.791071 User Manual

Craftsman WEEDWACKER 358.791071
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operator's Manual
32cc/1.9 cu.in. 2-Cycle
GASOLINE WEEDWAOKER ®
Model No.
358.791071
Safety
Assembly
Operation
Maintenance
Parts List
Espar_ol, p. 22
WARNING:
Read and follow all Safety Rules and Operating
Instructions before first use of this product.
For answers to your questions about this product:
Call 7 am-7 pm, Mon.-Sat., or 10 am-7 pm, Sun.
1-800-235-5878 _Hoo_slisted are Centrat Time)
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
545154227 Rev. 1 7/3/07 BRW
Question and Answer IconNeed help?

Do you have a question about the Craftsman WEEDWACKER 358.791071 and is the answer not in the manual?

Craftsman WEEDWACKER 358.791071 Specifications

General IconGeneral
Engine Type2-stroke
Engine Displacement25 cc
Cutting Swath17 inches
TypeGas Trimmer
Engine2-cycle
Fuel Tank Capacity10 oz
Shaft TypeStraight

Summary

SAFETY RULES

UNIT/MAINTENANCE SAFETY

FUEL SAFETY

TRANSPORTING AND STORAGE

LINE TRIMMER SAFETY

ADDITIONAL SAFETY RULES FOR OPTIONAL ATTACHMENTS

EDGER SAFETY

BLOWER/VACUUM SAFETY

BRUSHCUTTER SAFETY

CULTIVATOR SAFETY

HEDGE TRIMMER SAFETY

POLE PRUNER SAFETY

CARTON CONTENTS

ASSEMBLY

REMOVING TRIMMER ATTACHMENT (OR OTHER OPTIONAL ATTACHMENTS)

Procedure for detaching trimmer and other attachments.

INSTALLING OPTIONAL ATTACHMENTS

Steps for attaching optional equipment to the unit.

ATTACHING SHIELD

Instructions for properly securing the protective shield.

ADJUSTING THE HANDLE

Guidance on how to adjust the assist handle.

OPERATION

KNOW YOUR TRIMMER

Overview of the trimmer's components and controls.

ON/OFF SWITCH

Explanation of the unit's power switch functionality.

PRIMER BULB

How to use the primer bulb for starting the engine.

BEFORE STARTING ENGINE

Important checks and information before starting the engine.

FUELING ENGINE

Instructions and warnings for fueling the engine.

START LEVER

How the start lever aids in engine ignition.

COUPLER

Information about the coupler for attachments.

HOW TO STOP YOUR UNIT

HOW TO START YOUR UNIT

STARTING A COLD ENGINE

STARTING A WARM ENGINE

STARTING A FLOODED ENGINE

CRAFTSMAN® CONVERTIBLE™ FEATURE

OPERATING INSTRUCTIONS

OPERATING POSITION

CUTTING METHODS

MAINTENANCE

MAINTENANCE SCHEDULE

Recommended schedule for maintenance tasks.

GENERAL RECOMMENDATIONS

General advice for maintaining the unit.

CHECK FOR LOOSE FASTENERS AND PARTS

Procedure for checking fasteners and parts for security.

CHECK FOR DAMAGED OR WORN PARTS

How to identify and address damaged or worn components.

INSPECT AND CLEAN UNIT AND DECALS

Steps for inspecting and cleaning the unit and its decals.

CLEAN AIR FILTER

Instructions for cleaning the air filter.

INSPECT MUFFLER AND SPARK ARRESTING SCREEN

How to inspect the muffler and spark arresting screen.

SERVICE AND ADJUSTMENTS

LINE REPLACEMENT

Guide for replacing the trimmer line.

REPLACING THE TRIMMER HEAD

Instructions for replacing the trimmer head assembly.

STORAGE

SEASONAL STORAGE

Procedures for long-term storage of the unit.

FUEL SYSTEM

Instructions for managing the fuel system before storage.

TROUBLESHOOTING TABLE

U.S. EPA/CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

REPAIR PARTS

Related product manuals