f
REMOVING AND INSTALLING DRAWERS:
Empty the drawer.
Fully extend the drawer.
Release
Lever style- Lift or lower (depending on the slide) the
release lever on both sides and pull drawer out to
remove.
Tab style- Depress the release tabs on both sides and
pull drawer out to remove.
To reinstall, carefully align the slides and push the
drawer into the unit until the drawer stops.
t_. Lubricate the slides with grease or equivalent, (twice
yearly).
• Periodically the drawer fronts, drawer trim, and other
surfaces should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning
fluid.
k.
To Next Page
Loading...
Need help?
General
