EasyManua.ls Logo

Craftsman PREMIUM SERIES User Manual

Craftsman PREMIUM SERIES
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SEARS
Operator's Manual
[RRFTSMRN ®
PREMIUM SERIES
THIS OPERATING INSTRUCTION MANUAL
COVER ALL PREMIUM SERIES TOOL CENTERS,
INTERMIDIATE CHESTS, AND RISER ASSEMBLYS.
Please indicate the following
information from the service
part drawing provided.
Model Number:
Model Description:
*Product you purchased may vary from picture shown*
CAUTION:
Read and follow all Safety Rules and Operating
Instructions before first use of this product. Retain this document
for future reference.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Made in the U.S.A.
F890A5
4/97
SAFETY WARNINGS AND CAUTIONS:
DO NOT stand on this product You may fail which may cause personal injury
WEAR SAFETY GLASSES when removing or repositioning the slides The tool
could slip which may cause personal injury
When moving this product, do not pull it Push the product to prevent personal injury
Stacked products should be bolted together The products could become unstable
and tip, which may cause personal injury or product damage
Handle and swivel casters must be attached on the same side of the product
USE THE BRAKES when not moving this product This will prevent the product from
rolling, which may cause personal injury or product damage
BE CAREFUL when opening more than one drawer The product may become
unstable and tip, which may cause personal injury or product damage
DO NOT mount this product on a truck bed or any other moving object This may
cause personal injury or product damage
DO NOT step in the drawers You may fall which may cause personal injury
Appropriately secure this product before moving it with a forklift
DO NOT tow with power equipment The product could tip, which may cause
personal injury or product damage
DO NOT alter this product in any manner For example, do not weld external Iockbars
or attach electrical equipment This may cause product damage or personal injury
Keep the product on level surfaces The product may become unstable and tip if
stored or moved on an un-IeveI surface, which may cause personal injury or product
damage
When rearranging the drawers, be careful not to put too many heavy items in the top
drawers The product could become top heavy and tip, which may cause personal
injury or product damage
BE CAREFUL when closing the cover Remove hands before the cover closes
completely to prevent personal injury
Close the cover and lock the drawers and doors before moving this product The
drawers or doors could come open and make the product unstable and tip, which
may cause personal injury or product damage
When locking this product, close the drawers before closing the cover for lock bars to
work properly
The maximum weight for each drawer should be no more than 25 pounds
The maximum product weight, including contents, should be no more than 400
pounds for tool centers
11
A
Call 1-800-366-7278 for Service Parts E; JlII] II
U
Refer to Service Parts Drawing for full listing of Service Parts
Question and Answer IconNeed help?

Do you have a question about the Craftsman PREMIUM SERIES and is the answer not in the manual?

Craftsman PREMIUM SERIES Specifications

General IconGeneral
DrawersVaries by model
Weight CapacityVaries by model
DimensionsVaries by model
ColorRed
WheelsYes
Locking SystemYes

Summary

Safety

Safety Warnings and Cautions

Important safety warnings and operational cautions to prevent personal injury or product damage.

Assembly

Remove Chest from Roll-Away

Instructions for detaching the tool chest from the roll-away unit using provided hardware.

Caster Installation

Guidance on how to properly attach swivel and brake casters to the roll-away unit.

Mounting Intermediate Chest

Steps to securely attach the intermediate chest to the roll-away top using hardware.

Mounting Chest

Procedure for mounting the main tool chest onto the roll-away top using existing hardware.

Riser Assembly

Instructions for assembling the riser component, including sides, back, and securing it.

Shelf Installation

Steps for installing a shelf into the roll-away unit using plastic rivets.

Operation

Removing and Installing Drawers

Detailed steps on how to remove and reinsert drawers from the tool storage unit slides.

Locking Chest

Procedure for securing the main tool chest by inserting and locking the lockbar.

Locking Roll-Away & Intermediate Chest

Instructions for securing the roll-away and intermediate chest using the lockbar.

Locking Tool Center

Steps to lock the entire tool center, including the chest, panel, and base with a padlock.

Unlocking Units

Guidance on reversing the locking procedure to unlock the tool storage units.

Maintenance

Lubrication and Cleaning

Recommendations for lubricating casters, slides, and locks, plus cleaning surfaces.

Related product manuals