Craftsman 706.366440 - User Manual

OPERATOR'S MANUAL
T
®
CALL 1-800-366-7278 FOR SERVICE PARTS. Refer to Service
Parts Drawing for full listing of Service Parts.
LOCATING MODEL # iNFORMATiON
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
• The maximum weight for each drawer should be no more than
50 Ibs.
• The maximum product weight for both models, including con-
tents, should be no more than 600 Ibs.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179
° Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
° Auto wax will preserve the unit's luster finish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
° Grease and oil can be removed with most standard
cleaning fluids. For safety, use a nonflammable cleaning fluid.
° If drawer liners are supplied, it is recommended they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned
with soap and water.
DANGER A_, is used to indicate a hazardous situation which,
if not avoided, wil___[result in serious injury or death.
WARNING Z_ indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, _ result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before first use of this product.
DANGER _.
• DO NOT s;cand on this product. You may fall or cause product
to tip.
• DO NOT open more than one drawer. The product may be-
come unstable and tip.
• DO NOT step in the drawers. You may fall or cause product to
tip.
• DO NOT mount this product on a truck bed or any other
moving object.
• DO NOT move the product prior to closing and locking all the
drawers and chest lid. The drawers could come open and
make the product unstable and tip.
• DO NOT place any objects on top of chest lid. Remove all
objects from chest lid before opening.
WARNING Z_
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving
• USE THE BRAKES when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external Iockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift,
or to be towed with any mechanical devices.
• The maximum weight for each drawer should never be
exceeded.
• Only transport this product empty. Properly secure when
transporting.
• DO NOT exceed maximum product weight, including contents.
See Capacities for more information.
F1911

Summary

Service Parts and Information

Locating Model # Information

Find model numbers and service part information on a label inside the top drawer.

Capacities

Maintenance Schedule

Safety Precautions

General Safety Warnings

Essential safety instructions including DANGER, WARNING, and CAUTION statements to prevent injury or damage.

Assembly Instructions

Side Handle Attachment

Instructions for attaching the side handle using specified screws and tools.

Caster Installation

Procedure for installing casters and caster angles onto the cabinet.

Gas Springs Installation

Guide for installing gas springs using ball studs and clip-on nuts.

Labels (If Applicable)

Steps for applying labels to the unit, including surface preparation.

Operation and Maintenance

Removing Drawers

Instructions on how to safely remove drawers using the lever release mechanism.

Installing Drawers

Procedure for inserting drawers back into the slides for proper operation.

Removing and Installing Slides

Steps for detaching and reattaching drawer slides, including rivet replacement.

Craftsman 706.366440 Specifications

General

Brand	Craftsman
Model	706.366440
Category	Tool Storage
Language	English