Craftwell CUT’N’BOSS - In the Box; Getting Started

D
C
A
B
IN THE BOX
GETTING STARTED
Cut’n’Boss machine
(7) Embossing Folders
(12) Cutting Dies
Platforms
(2) Platform A
(1) Platform B
(1) Platform D
Magnetic Shim
Metal Adapter Plate
User Manual
Power Adaptor
Position the Cut’n’Boss on a at & dry surface.
Connect the power adaptor to the power cord (A).
Connect the power cord to the Cut’n’Boss (B).
Connect the power plug to a grounded power outlet (C).
Press the power button to turn on (D).