Why is BT not functioning on my Craig Headphone?
If the Bluetooth on your Craig Headphone isn't working, it might be because the external Bluetooth device hasn't been paired with the unit. You should pair the external Bluetooth device to the unit. Alternatively, the external Bluetooth device might be too far from the earbud. Try placing the external Bluetooth device closer to the earbud.
What to do if sound distortion on Craig Headphone?
If you are experiencing sound distortion with your Craig Headphone, it's likely that the volume level of the paired device is too high. Try reducing the volume level of the paired device to resolve this issue.
What to do if no sound or sound weak on Craig CBH568?
If you're experiencing no sound or weak sound with your Craig Headphone, the volume level of the paired device might be too low. Try increasing the volume level on the paired device.
What to do if Craig CBH568 Earbuds can NOT be recharging?
If the earbuds are not recharging, there could be a few reasons: 1. The button on the charging station might be in the off position. Press the button on the front of the charging station to start charging. The red indicator on the earbud charging port will illuminate. 2. The charging contacts on the charging station and/or earbuds might be dirty. Clear them before charging. 3. The earbud might not have been inserted firmly into the charging port. Insert the earbud into the charging port firmly.
General| Connectivity | Wired |
|---|---|
| Driver Size | 40mm |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32 Ohms |
| Connector | 3.5mm |
| Color | Black |
| Type | Over-ear |
| Cable Length | 1.2m |
Details the controls and indicators specific to the earbuds.
Instructions for charging the main charging station unit.
Instructions for placing earbuds into the charging station.
Step-by-step guide for using the left earbud independently.
Step-by-step guide for using the right earbud independently.
Instructions for pairing and using both earbuds simultaneously.
To Next Page