Fig.1 Fig.2 Fig.3
BATTERY PRECAUTIONS
EFFECTIVE DISTANCE OF REMOTE TRANSMITTER
Approx.15 feet
-First Time Use
Remove and discard the insulation tab as figure on the right
-Replacing Batteries For Remote Control
1. Push and slide out the battery holder as figure 1 below.
2. Replace the battery with a new CR2025 button cell as the
polarity markings on the rear of the Remote Control.
3. Close the battery holder.
.
Remote Sensor, on
the front of main unit
BATTERY INSTALLATION--- REMOTE CONTROL
To Next Page
Loading...
