EasyManua.ls Logo

Craig cs2500 User Manual

Craig cs2500
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
SAFETY PRECAUTIONS
INFORMATION:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
2
LOCATION OF CONTROLS
3
4
2
1
5
7
6
8
9
1. FM Antenna
2. FM Dial Scale and Pointer
3. VOLUME/ON/OFF Control
4. Headphones Jack (Side of Unit)
5. TUNING Control
6. AM Dial Scale and Pointer
7. BAND Switch
8. Speaker
9. Battery Compartment (Rear of Unit)
INSTALLATION
3
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc)
or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat
and rupture. (Follow battery manufacturer’s directions.)
Slide the battery compartment cover to remove.
+
+
1
HEADPHONES:
For private listening, insert headphones into the Headphones jack. The
speaker will be disconnected.
6. Do not dispose of batteries in fire, batteries may explode or leak.
7. Clean the battery contacts and also those of the device prior to battery
installation.
Insert two (2) AA
size batteries (not included) into the compartment as the polarity
marking inside battery compartment.
CS2500_Eng_2013 (420 x 148mm) • 6 June 2013 • AT
148 mm
105 mm
Question and Answer IconNeed help?

Do you have a question about the Craig cs2500 and is the answer not in the manual?

Craig cs2500 Specifications

General IconGeneral
BrandCraig
ModelCS2500
CategoryPortable Radio
Tuner TechnologyAnalog
Band SupportAM/FM
Battery TypeAA
Headphone JackYes
AntennaTelescopic
Power SourceBattery

Summary

Safety Precautions

Information

FCC compliance and advice on handling radio frequency interference in residential installations.

Location of Controls

Control Descriptions

Identifies and describes all controls and features of the radio, including antenna, dials, and speaker.

Installation and Usage

Installation Steps

Instructions for installing batteries and setting up the device for initial use.

Battery Precautions

Essential guidelines for safe and proper battery handling and replacement.

Headphones Usage

Guidance on connecting headphones for private listening and automatic speaker disconnection.

Operation

Listening to the Radio

Step-by-step instructions for turning the radio on, selecting stations, and adjusting volume.

Antenna Optimization

Tips for maximizing radio reception by adjusting the FM antenna and rotating the unit for AM.

Troubleshooting

Common Issues and Solutions

A guide to diagnosing and resolving common problems like no sound or distorted audio.

Specifications

Technical Details

Provides technical data including power requirements, frequency ranges, and speaker impedance.

Limited Warranty

Warranty Coverage

Details the warranty period, terms, conditions, and procedures for obtaining service.