6
Min15m m
7m m
Max30m m
UNDER NO CIRCUMSTANCES MUST THE APPLIANCE BE CONNECTED TO 220
V POWER SUPPLY! IT MAY CAUSE TOTAL DAMAGE OF ELECTRICAL
COMPONENTS AND DANGER FOR USERS.
6. GAS LEAKAGE
To check gas leakage we recommend to use an electric gas detector of a verified type. In
case of an accident close the gas inlet tap and refer to a gas-fitter, seller or specialised
technician.
7. FIXATION OF THE APPLIANCE TO FURNITURE
To build the appliance ino furniture a space with dimensions shown on fig. 1 - 6 must be
available depending to model (see label of appliance). Arbitrary position can be chosen.
The appliance has to be placed on a firm, stable base in furniture. The front of the appliance
must be fixed firmly to the furniture by means of supplied screws and 4 mounting frames.
For fixation it is not allowed to use gas lines, taps or parts of burners.
Fig 1
Fig 2
C
Fixation to furniture
Furniture
Detail D
Oven
D
SECTION A-A
To Next Page
Loading...