Package Contents
So now your N22H is out of it’s packaging, you’re probably itching to get it powered on and
making music! Before you get started, please read the sections below that will help guide you
through the process of getting your N22H setup, plugged in, and ready-to-use as quickly as
possible!
The following items can be found in the packaging alongside N22H:
- 9v DC power adapter - (Located in compartment below N22H)
- Quickstart Guide
Power Supply
The power adapter supplied with N22H is a 9v, DC,
500mA power supply with a centre-negative, 2.1mm
barrel fitted on the end. This supply is the same type of
supply that is used to power many popular guitar pedals
and pedalboards such including isolated multi-output
power supplies, or inline daisy chain adapters.
Using 3rd party power supplies with N22H is supported
provided the supply is of the correct specification. We
recommend a supply with between 500mA and 1A of
available current.
Note:
Please only use the supplied power supply or
one that has the same power specifications.
Damage caused using an improper PSU with
incorrect polarity or voltage is not covered
under warranty.
To Next Page