Crane & Viceroy Watch User Manual

Verify the second-hand's alignment before use, recalibrating if it stops incorrectly.

Adjust Time Zone setting when traveling to ensure correct time display and signal reception.

Set the correct Time Zone by pressing buttons to move the second-hand to the desired position.

Reference table correlating world cities, time zones, and second-hand positions for setting.

Check the AM/PM status by observing the second-hand position when holding the S3 button.

Steps to re-align the second-hand if it has shifted or is not pointing correctly.

Reasons and solutions for the watch failing to pick up the radio time signal.

Indicates a low battery; requires battery replacement.

Usually due to an incorrect Time Zone setting; requires manual adjustment.

Align all hands to 12:00:00 and confirm after replacing the battery for normal operation.