Crane Electronics TorqueStar Plus - Quick Start Guide Manual

Crane Electronics Ltd
The force in torque management
TorqueStar Plus & Pro - Quick Start Guide
Geng started with your TorqueStar torque data collector.
Micro USB
USB Slot
(Flash Drive or
OMS Lite Cable)
25-Way D-type
Female Transducer Port
5V DC Power Supply
Switching On
Turn on your TorqueStar by pressing the on/o buon
situated below the arrow keys. Pressing this buon
whilst the TorqueStar is on will turn it o.
1
Starng the TorqueStar
The rst screen you will see is below. It conrms what
version of TorqueStar you have, the serial number,
soware version, calibraon due date and also what
features are available.
2
Home Screen
Aer a few seconds the Home Screen will appear.
Depending on your TorqueStar model, using your
arrow keypad you can select between Check, Jobs or
Rounds modes or User Login. Using the funcon keys,
you can also access these modes as well as General
Sengs.
3
Connecng a Transducer
The screen below will be displayed when there is no
transducer connected. To connect your transducer,
plug the transducer cable into the connecon port
on the back of the TorqueStar. The TorqueStar will
automacally recognise all Crane UTA and CheckStar
Mul transducers. For IS transducer set-up please see
the operator’s manual.
4
LEDs
4” Backlit Colour
Display Screen
Funcon
So Keys
Direconal
Arrow Keys
On/O Buon
Front Back
Green ‘Accept’ Key