To Next PageTo Next Page
Need help?Do you have a question about the CRANE PUMPS & SYSTEMS OGP2022CE and is the answer not in the manual?
Explains hazard symbols for fluids, biohazards, machinery, heat, pressure, and voltage.
Covers safe practices for clothing, materials, water usage, and pump handling.
Emphasizes grounding and disconnecting power before servicing.
Lists materials, dimensions, and performance data for pump parts.
Provides key measurements and diagrams for pump dimensions.
Details HP, voltage, phase, load amps, and cord specifications for each model.
Lists appropriate breaker ratings for each pump model.
Specifies minimum and maximum clearance needed under the pump for solids.
Details assembly of discharge piping, check valves, and shut-off valves.
Guidance on pump cable connections, splices, and junction box requirements.
Illustrates the electrical connections for single phase 240V 'L' series pumps.
Illustrates connections for other single phase 240V pump series.
Identifies causes like electrical issues, float restrictions, or incorrect voltage.
Addresses issues like wrong voltage, plugged inlets, or incorrect sizing.
Covers causes such as airlock, discharge restriction, or overload trips.
Diagnoses problems like high pressure, rigid piping, or cutter damage.
Specifies conditions like improper installation or voltage that void the warranty.
Clarifies that repair/replacement is the sole remedy and limits consequential damages.
General| Model | OGP2022CE |
|---|---|
| Category | Water Pump |
| Manufacturer | CRANE PUMPS & SYSTEMS |
| Phase | 1 |
| Material | Cast Iron |
| Inlet Size | 1.25 inches |
| Outlet Size | 1.25 inches |
| Seal Type | Mechanical Seal |
