Need help?Do you have a question about the Crate G-600H and is the answer not in the manual?
General| Type | Guitar Amplifier Head |
|---|---|
| Speaker Outputs | 1 x 1/4" |
| Effects Loop | Yes |
| Technology | Solid State |
| Effects | Reverb |
| Channels | 2 |
| Weight | 28 lbs |
| Inputs | 1 x 1/4" (Instrument) |
| Outputs | 1 x 1/4" |
| EQ | 3-Band |
Details Crate's commitment to quality, American manufacturing, and musician-focused design.
Specifies RMS output power at different impedance loads (4, 8, 16 ohms) at 120 VAC.
Details two cabinet models (GC412-R, GC412-S) with Celestion speakers, power handling, and dimensions.
Lists the frequency range and dB levels for Bass, Mid, Treble, Presence, and Bright controls.
Specifies input impedance, max signal level, and total system gain for different channels.
Provides the signal-to-noise ratio for Channel A and Channel B.
States the required voltage, frequency, and maximum power consumption.
Lists the physical dimensions and weight of the amplifier cabinet.
Describes the 0 dB and -6 dB input jacks for connecting instruments.
Details controls for Channel A: Indicator, Gain, Level, Shape, and Presence.
Explains the channel select switch and footswitch jack for switching between channels.
Details controls for Channel B: Indicator, Gain, Level, and Low (Bass).
Describes Mid, High (Treble), and Bright controls for tone shaping, primarily for Channel B.
Explains Master Reverb, Presence controls, and the Power ON/OFF switch and indicator.
Details the Power Cord, Speaker Jacks, Line In, and Line Out jacks.
Includes warnings about headphone use with speaker jacks and stacking cabinets.
Outlines the one-year warranty, exclusions, and service procedures.
To Next Page
