Crate G1600XL User Manual

Details about the 0 dB and -6 dB input jacks for connecting instruments.

Accepts standard 1/4" phone plug for low to line level signal sources like electric guitars.

Padded 6 dB for hotter inputs like tape decks or guitars with hot pickups.

Controls for Channel A, including gain, level, and tone shaping features.

Sets the amount of gain for Channel A, varying distortion from minimal to maximum.

Controls the overall volume of Channel A, used with the Gain Control.

Part of the shape matrix, used for adding bottom end to the A Channel.

Overall tone control for Channel A, affecting mid-range emphasis or a 'fat' sound.

Part of the shape matrix, used for adding a lead sound to the A Channel.

Controls related to switching between amplifier channels.

LED indicator for Channel A mode.

Switch to select between Channel A and Channel B.

LED indicator for Channel B mode.

Sets the overall listening level for Channel B, independent of Channel A.

Adjusts the amount of 'Bottom' or 'Warmth' in Channel B's sound.

Adjusts midrange tonal qualities, thinning or fattening the sound.

Affects the upper harmonic range, adding crispness or sharpness.

Affects brilliance by adding 'bite' or sharpness to Channel B's sound.

Alters apparent room acoustics, from 'Flat'/'Dry' to 'Concert Hall'.

Jack for connecting the Channel Selector/Reverb footswitch.

Links amp to additional amps or tape recorders; cannot connect external speakers.

Direct input to the power amp, usable for an effect loop with Line Out.

LED indicator that shows when the amplifier is on.

Two-position switch to turn the unit on or off.

Heavy-duty grounded three-wire power cord connection details.

Jacks for connecting external speakers; warns about impedance limits.