Need help?Do you have a question about the Crate G212XL and is the answer not in the manual?
General| Brand | Crate |
|---|---|
| Model | G212XL |
| Category | Musical Instrument Amplifier |
| Language | English |
Details the input jacks, channel controls, and indicators on the front panel.
Standard 1/4" jack for low to line level signals like electric guitar.
Padded 1/4" jack for hotter inputs like tape decks or guitars with hot pickups.
Sets the amount of gain for Channel A, controlling distortion levels.
Controls the overall listening level for Channel A, used with Gain Control.
Part of the shape matrix, used for adding bottom end to Channel A.
Tone control for Channel A, affecting midrange emphasis for a 'fat' sound.
Part of the shape matrix, used for adding a lead sound to Channel A.
LED indicator showing the amplifier is in Channel A mode.
Switch to select between Channel A and Channel B.
LED indicator showing the amplifier is in Channel B mode.
Details volume, EQ, and bright switch for Channel B.
Sets the overall listening level for Channel B, independent of Channel A.
Adjusts bass frequencies to increase or decrease 'bottom' or 'warmth'.
Adjusts midrange tonal qualities, affecting thinness or fullness.
Affects upper harmonics, adding crispness or sharpness.
Adds brilliance and 'bite' to Channel B's sound.
Details the reverb depth control for altering room acoustics.
Alters the apparent acoustical qualities of a room, from dry to concert hall.
Details the footswitch jack for channel selection and reverb control.
Describes Line Out and Line In jacks for connecting external devices or effect loops.
Details the ON/OFF LED indicator and the main power switch.
Details the heavy-duty, grounded three-wire power cord and safe connection.
Specifies the amplifier's RMS output power and distortion level.
Lists the speaker models used in different amplifier configurations.
Defines the impedance for the 0 dB and -6 dB input jacks.
Specifies the maximum voltage levels accepted by the input jacks.
Details the system gain for Channel A and Channel B under specific conditions.
Provides the signal-to-noise ratio for Channel A and Channel B.
Lists specific dB boost or range for Sub, Focus, Lead, Low, Mid, and High controls.
Specifies the required voltage, frequency, and wattage for operation.
Indicates the type and rating of the internal fuse.
Provides dimensions and weight for the G80XL and G212XL cabinets.
To Next Page
