Need help?Do you have a question about the Crate GT65/212 and is the answer not in the manual?
General| Brand | Crate |
|---|---|
| Model | GT65/212 |
| Category | Musical Instrument Amplifier |
| Language | English |
Connects your guitar to the amplifier via a shielded instrument cable.
Illuminates when the Solo channel is selected.
Adjusts the amount of distortion for the Solo channel.
Tunes the tone by adjusting mid frequencies (CCW) or low/high frequencies (CW).
Controls the output level of the Solo channel.
Selects between Solo and Rhythm channels when the Clean/Solo/Rhythm switch is engaged.
Illuminates when the Rhythm channel is selected.
Adjusts the amount of distortion for the Rhythm channel.
Adjusts Low, Mid, and High frequencies for the Rhythm channel.
Controls the output level of the Rhythm channel.
Selects Clean channel (out) or Solo/Rhythm channels (depressed).
Illuminates when the Clean channel is selected.
Adjusts Volume, Low, Mid, and High frequencies for the Clean channel.
Adjusts the amount of reverb effect, from dry (CCW) to full effect (CW).
Connects CD player or tape deck output for mixed playback.
Turns the amplifier on (top depressed) or off (bottom depressed).
Protects amplifier from power source issues; replace with identical fuse type.
Connects to an external speaker cabinet; wired in series with internal speaker.
Connects to footswitch for remote reverb on/off control.
Connects to footswitch for remote channel switching (Clean/Solo/Rhythm).
Connects external effects devices using a stereo-to-mono Y-cord or adapter.
Grounded power cord connects to a properly wired outlet.
To Next Page
