MXB50 TECHNICAL SPECIFICATIONS:
Output Power Rating 50 watts RMS @ 5% THD 4 ohms, 120 VAC
Maximum Input Signal Accepted 15 volts peak-to-peak
Input Impedance 220k ohms
Signal to Noise Ratio 75dB
Low Control 28dB Range @ 60Hz
Low Mid Control 15dB Range @ 400Hz
High Mid Control 18dB Range @ 1kHz
High Control 33dB Range @ 10kHz
Power Requirements 120 VAC, 60Hz, 85VA
100/115VAC, 50/60Hz, 85VA
230VAC, 50Hz, 85VA
Speaker Size and Rating Crate Custom Design 12”, 50 watts
Size and Weight 19.5” H x 15.75” W x 14.25” D, 43 lbs.
The MBX50 is covered with a durable black Tolex material: wipe it clean with a lint-free cloth.
Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
www.crateamps.com
@2002 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133
18-461-01 • 07/02
To Previous Page
Loading...
Need help?
General
