Crate&Barrel Pilsen User Manual

1/15
800.967.6696 | crateandbarrel.comMade in China - r02
English
This page lists the contents included in the box. Please
take time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Français
Cette feuille présente la liste du matériel contenu dans le
carton. Veuillez prendre un moment pour identifier chaque
pièce de quincaillerie et chacune des composantes. Afin de
protéger les composantes du meuble, les poser sur un
tapis ou sur une surface matelassée au fur et à mesure du
déballage et de la préparation au montage. Veuillez suivre
avec attention les étapes du montage présentées. Si le
meuble n’est pas monté correctement, il y a risque de
dégâts pour vous ou vos biens.
Español
Esta página muestra el contenido de la caja. Por favor
tome tiempo para identificar las partes al igual que los
componentes individuales del producto. A medida que
desempaqueta y se prepara para el montaje, coloque los
contenidos sobre un área alfombrada o acolchada para
protegerlos de daños. Por favor siga las instrucciones de
montaje al pie de la letra. El montaje incorrecto puede
producir daños personales o de bienes.
Pilsen Corner Desk / Bureau de Coin / Escritorio para Esquina
x 01
x 01
!
A
x 26
x 01
x 01
x 01
x 01
x 01
x 01
x 01
x 01
x 01
x 02
glass top
dessus en verre
superficie (parte superior)
de vidrio
x 01
x 04
I
J
H
D
C
B
E
F
G
K
x 01
L
x 12
for wood top only
uniquement pour dessus en bois
para superficie de madera solamente
x 12
for glass top only
uniquement pour dessus en verre
para superficie de vidrio solamente
OR
OU
O
x 02
wood top
dessus en bois
superficie (parte superior)
de madera

Crate&Barrel Pilsen Specifications

General

Brand	Crate&Barrel
Model	Pilsen
Category	Furniture
Language	English

Summary

Product Contents and Hardware Identification

Hardware Pack A (Screws x4)

Identifies screws labeled 'A' and their quantity (x4).

Hardware Pack B (Screws x26)

Identifies screws labeled 'B' and their quantity (x26).

Hardware Pack C (Wood Top Screws x12)

Identifies screws labeled 'C' for wood top (x12).

Hardware Pack D (Glass Top Screws x12)

Identifies screws labeled 'D' for glass top (x12).

Hardware Pack E (Cam Locks x1)

Identifies cam locks labeled 'E' (x1).

Hardware Pack F (Cam Dowels x1)

Identifies cam dowels labeled 'F' (x1).

Hardware Pack G (Screws x1)

Identifies screws labeled 'G' (x1).

Hardware Pack H (Cam Locks x1)

Identifies cam locks labeled 'H' (x1).

Hardware Pack I (Cam Dowels x1)

Identifies cam dowels labeled 'I' (x1).

Hardware Pack J (Cam Dowels x1)

Identifies cam dowels labeled 'J' (x1).

Hardware Pack K (Screws x1)

Identifies screws labeled 'K' (x1).

Hardware Pack L (Cam Locks x1)

Identifies cam locks labeled 'L' (x1).

Glass Top Component

Specifies the glass top component (x2).

Wood Top Component

Specifies the wood top component (x2).

Assembly Instructions Guidance

Guidance on following assembly steps for safe and correct product setup.

Damage Prevention Advice

Advice to unpack and assemble on a carpeted or padded area to prevent damage.

Assembly Option 1

Step 1: Initial Frame Assembly

Connect base frame components A, B, C, D.

Step 2: Attaching Components E and B

Secure component B to A, and component E to A.

Step 3: Securing Component F

Attach component F to A and B using hardware.

Step 4: Attaching Component G

Secure component G to A and B using hardware.

Step 5: Installing Support Pieces

Attach components C, H, I, J to the frame.

Step 6: Installing Hardware K

Use hardware K to secure structural elements.

Step 7: Attaching Component L

Secure component L using hardware.

Step 8: Frame Positioning

Flip and position the desk frame for the next stage.

Step 9: Frame Completion

The main desk frame structure is now complete.

Top Surface Installation for Option 1

Glass Top Assembly

Install the glass top using hardware A (x12).

Wood Top Assembly

Install the wood top using hardware B (x12).

Cleaning and Care Instructions

Surface Care and Maintenance

Instructions for cleaning surfaces with soft cloth and using coasters.

Assembly Option 2

Step 1: Initial Frame Assembly

Connect base frame components J, B, C, L.

Step 2: Attaching Components E and B

Secure component B to A, and component E to A.

Step 3: Securing Component F

Attach component F to A and B using hardware.

Step 4: Attaching Component G

Secure component G to A and B using hardware.

Step 5: Installing Support Pieces

Attach components D, H, C, I to the frame.

Step 6: Installing Hardware K

Use hardware K to secure structural elements.

Step 7: Attaching Component A

Secure component A using hardware.

Step 8: Frame Positioning

Flip and position the desk frame for the next stage.

Step 9: Frame Completion

The main desk frame structure is now complete.

Top Surface Installation for Option 2

Glass Top Assembly

Install the glass top using hardware A (x12).

Wood Top Assembly

Install the wood top using hardware B (x12).