BIOREMEDIATING parts washing system
®
USER INSTRUCTION MANUAL
ORIGINAL INSTRUCTIONS
page 36 of 80
How often do I add OzzyJuice
®
to the
SmartWasher
®
?
The SmartWasher
®
comes equipped with an add flu-
id light which illuminates when you are low on fluid.
When this light is on, simply add a 20 litre container
of OzzyJuice
®
to bring the fluid level up to normal. On
average, with normal use, you will add a 20 liter container
of OzzyJuice
®
approximately every six to eight weeks.
How quickly can Ozzy break down oil and
grease?
Once activated, Ozzy and his friends are constant-
ly eating. Assuming the system is operating optimally
(OzzyJuice
®
temperature between 40°C - 46°C and
the OzzyMat
®
routinely changed a minimum of once
every 30 days) the rate at which the hydrocarbons can
remediate can approach 80% every seven days. Analyses
performed on samples of used OzzyJuice
®
from operating
SmartWasher
®
systems consistently show oil and grease
levels in the 1,400 parts per million range. BY COMPAR-
ISON, used, non-bioremediating, aqueous cleaners can
average over 20,000 parts per million of oil and grease.
Does anything kill Ozzy?
YES. Any biocides designed to kill microbes, such as
bleach and Lysol™, will kill Ozzy; chemicals that kill
living things like some strong pesticides and rat poison
may be harmful to Ozzy.
How often, how much and when are you add-
ing fluid?
A full container of OzzyJuice
®
should be added immedi-
ately when the “Add Fluid” light comes on. The system
is designed to warn users at the point at which fluid
should be added. Please keep in mind that the light will
remain illuminated while fluid is low, and more fluid will
be needed to reach the proper operating level. If the
“Add Fluid” light is on, the heating of the cleaning fluid
is switched of. Please note that in this
How many hours a day do you have the pump
running?
The more the pump runs, the more evaporation occurs.
Never leave the pump running when the SmartWasher
®
is not in use.
How often do I change the OzzyMat
®
?
At least once a month. This simple act accomplishes
three things: First, it keeps trapped contaminants from
reaching inappropriate levels. Secondly, Ozzy microbes
are introduced into the SmartWasher system through
the OzzyMat
®
. Every time you change the OzzyMat
®
you introduce fresh Ozzy(s) to the existing microbe
colony which keeps the system working at an optimum
level. Finally, changing the OzzyMat
®
keeps sludge from
building up in the base of the unit. If the OzzyMat
®
is not
changed regularly and allowed to become clogged, large
contaminants can flow into the reservoir via the overflow
holes in the sink, potentially causing sludge to build up.
How do I dispose of the OzzyMat
®
?
In many areas the OzzyMat
®
can be disposed of in a
non-leaching, sealed manner, and disposed of as solid
waste. But it must always be disposed of in accordance
with National Regulations.
What do I do if the OzzyMat
®
clogs up quickly
To Next Page
Loading...
Need help?
General
