Scanning
The main body of the page is a 3D rendering area, and the scanning phase is used to display a point cloud.
The point cloud is divided into two parts, one is the current frame, and the other is the scanned point cloud.
The current frame in red indicates poor point cloud quality, and the current frame in green indicates
successful tracking and registration. The scanned point cloud is displayed in a quality chromatographic mode
by default. When displayed in orange, it indicates that the scanned part is of poor quality and requires
repeated scanning. When displayed in green, it indicates that the scanned part is of good quality and meets
the quality requirements for generating the model.
The 3D rendering area supports interaction during the pause phase, and its interaction methods are as
follows:
Two-finger press and move (with
haptic feedback)
Area A
This section mainly displays the current process stage. Click Next to proceed to the next stage of
processing.
Home button, used to leave the scanning process and return to the home page。
Area B mainly displays the preview area of scanning.
This section is the same as the preview stage, and includes an IR preview window (above) and an RGB/depth
preview window (below). See the preview chapter for details of its configuration items.
: Indicating the device connection status, cannot be clicked.
Area C
To Next Page
Loading...
