Need help?Do you have a question about the Creality CR-Scan Ferret and is the answer not in the manual?
General| Scan Accuracy | Up to 0.1mm |
|---|---|
| Scan Speed | Up to 30 fps |
| Output Formats | OBJ, STL, PLY |
| Connectivity | USB |
| Technology | Structured Light |
| Working Distance | 150mm - 700mm |
| Scanner Weight | 105g |
| Operating Systems | Windows, Android |
| Minimum Scan Volume | 50mm x 50mm x 50mm |
| Single Capture Range | 560mm x 820mm |
Details how to connect the CR-Scan Ferret scanner to an Android mobile phone.
Explains how to connect the CR-Scan Ferret scanner to a computer via USB.
Categorizes objects by dimension and explains 'Geometry' vs 'Texture' scanning modes.
Covers beginner guidance and confirming device connection status in the PC software.
Provides instructions for downloading and upgrading the scanner's firmware.
Guides users through configuring project settings like object, feature, and accuracy before scanning.
Covers tools for editing point clouds and the process of converting them into meshes.
To Next Page
