Poor scanning indicated by Quality spectrum
Optimization
This stage is used to optimize scanned point clouds and display them. Point cloud optimization and
subsequent stages automatically save model related results.
The 3D rendering area is used to display the model. The display mode supports solid color display mode,
and the delivery method is the same as described in the scanning section.
: Share button. After point cloud optimization and subsequent steps, the scanning results can be
shared.
The inset picture above shows the configuration items for the next meshing step.
If Holefilling is on, the small holes will be filled with neighboring data in order to ensure the completeness of
the model.
If Closure is on, the meshed model will be enclosed.
The meshed model can be saved as your choice in formats: stl, obj, ply.
To Next Page
Loading...
