*如打印前料盘有残渣，请先清理料盘，一般设置清理时间为15s,再用塑胶铲刀铲掉。
*If there is residue in resin vat before printing, please clean resin vat first. The cleaning time is generally set to 15 seconds and then shovel it off with a plastic blade.
18
Clean the Resin Vat
料盘清理
8
Please confirm that the printing platform has been removed,
and there are moderate consumables in the vat.
Please set the exposure time of the test image:
15 s
Next
请确认打印平台已经取下，料盘里面有适量耗材。
请设置测试图像的曝光时间：
15 s
下一步
To Next Page
Loading...