Need help?Do you have a question about the Creality CV-01 PRO and is the answer not in the manual?
General| Output Voltage | 24V |
|---|---|
| Connectivity | USB |
| Supported File Formats | STL/OBJ |
| Slicer Software | Creality Slicer |
| Printer Dimensions | 470 x 470 x 615 mm |
| Engraving Area | Not Applicable |
| Laser Power | Not Applicable |
| Spot Size | Not Applicable |
| Wavelength | Not Applicable |
| Engraving Accuracy | Not Applicable |
| Engraving Speed | Not Applicable |
| Operating System | Not Applicable |
| Machine Size | 470 x 470 x 615 mm |
| Machine Weight | 12 kg |
| Nozzle Diameter | Unavailable |
| Nozzle Temperature | Unavailable |
| Bed Temperature | Unavailable |
| Filament Diameter | Unavailable |
Key safety instructions for machine operation and storage.
Instructions for exporting the processing file (G-code) to the TF card.
Procedure for adjusting the manual nut and fixed focus bar for material contact.
To Next Page
