10
2. Double-click to open the "CrealityLaser" software, click "Setup" button in the upper
right, select machine (CV-01 Pro), and click “Return"
3. Click "Add File" in the toolbar to find the image file that needs to be engraved. Open
and import the image into CrealityLaser software; Adjust the size, angle, position, and
flip mode of the image file in the console, and set the image processing mode, density,
material, working parameters, etc.
Preview the processing effect of the image and generate G-code. You can see the
estimated working time at the bottom right of the interface:
To Next Page
Loading...