Creality3D CR-10mini Series User Manual

CR-10mini Series 3D Printer User
Manual
User Manual is for the CR-10 Series of 3D printers. It is also
applicable for the CR-10S/CR-10 S4/CR-10 S5.
But CR-10 mini without T-Bracket (Right) & Decoration Strip.
Due to the different types of devices ,Hardware and software upgrade. the
devices have little different, it is normal phenomenon. Subject to actual
device received.
Detailed instructions for using are available in the TF card.
V.6.0

Creality3D CR-10mini Series Specifications

General

Build Volume	300 x 220 x 300 mm
Filament Diameter	1.75 mm
Frame Material	Aluminum
Printing Technology	FDM (Fused Deposition Modeling)
Nozzle Diameter	0.4 mm
Print Speed	≤ 180 mm/s
Connectivity	USB, SD Card
Supported Materials	PLA, ABS, TPU
Bed Temperature	≤100°C
Nozzle Temperature	≤ 250°C