EasyManua.ls Logo

Create JET WASHER - Page 13

Create JET WASHER
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
ENGLISH
The rotation of the gun will adjust your cleaning angle during a full fan spray pattern, to make
every user nd its most comfortable and efcient cleaning position.
Push the button to “unlock” side, the rotating function will be opened. And push the button to
“unlock” side if you don’t need this function.
There will be a hose reel xed on the handle, you can collect the hose around this hose reel and use
only the length you need or to have the hose collected when it is no longer in use.
The water inlet lter must be inspected regularly, so as to avoid blockage and restriction in the
water supply to the pump.
5. ROTATE THE GUN
6. HOSE REEL
7. WATER INLET FILTER
When the nozzle is clogged, it will cause the pump to build pressure and may cause unit to
surge, you can clean the nozzle inserting the needle into the tip to rid of the deposits. For the
adjustable nozzle, you can lubricate the nozzle collar (high pressure to low pressure) by using
non-water soluble grease regularly.
The pressure washer will dispense detergent at low pressure. Use the adjustable spray nozzle
to rinse clean.
Biodegradable detergents are specically formulated to protect the environment and your
pressure washer. These detergents wil not clog the lter and will protect the internal parts of
the pressure washer for a longer life.
Warning: Never use products with bleach or chlorine or any other corrosive materials, includ-
ing liquids containing solvents (gas, oils, etc.), tri-sodium phosphate products, ammonia or ac-
id-based cleaners. These chemicals will harm the unit and cause damage to the surface being
cleaned. Always read the label.
8. CLEANING NEEDLE
9. USING DETERGENTS

Table of Contents