8
FEATURES
Simple to use
Tests all 121.5 Mhz. and all 406 to 406.1 Mhz. ELTs and PLBs
Decodes and displays the message
15 minute inactivity shutdown to conserve the batteries
Internal 50 ohm antenna load for power measurements
Measures RF power output
Measures relative RF radiated field strength
Pass / fail red or green LED indication of test results
80 character display (4 lines of 20 characters).
Displays protocol, format, message, and test measurement values
Measures for 121.5 Mhz.
Frequency
Modulation
Power or field strength
Measures for 406 Mhz.
Frequency
Modulation
Power or field strength
Transmitter output stability
Transmission time
Transmission recycling time
Data clocking rate
Un-modulated time
To Next Page
Loading...