Creative Engineering ROCK-A-FIRE EXPLOSION - Page 229

Symptom: Poor or Distorted Audio in one channel only
Procedure Result
1. Clean tape heads and
Demagnetize.
2. Exchange cables on Deck
3. Exchange cables from
channels 1 & 2 of the
DBX box output.
4. Exchange cables on
Equalizer.
5. Check speakers.
6. Check amplifiers.
4-oos
See Tape Deck Manual.
If problem does not move with
cable,the Tape Deck is at
fault, repair or replace it.
If sound comes out clear -
DBX is bad replace it or
see section on DBX pages 5-003
and 5-019 thru 5-025.
Reset and check gain or
replace.
Replace if necessary,
page 5-003.
See manual or replace.