Creative Grids Kitty Cornered - User Manual

Kitty Cornered Item #CGRDH5
www.creativegridsUSA.com
MADE IN
USA
6
Now you are ready to sew!
Referring to cutting chart Unit A on the
Kitty Cornered tool, cut (2) squares.
Fold the squares diagonally and press.
Place the tip of the folded square at
the corner of the Step 1 section of
the tool, and align the folded edge
on the dashed line.
Cut.
Trim 1Step 3
Trim 2
Step 1
Step 2
CGRDH5
Clip Corner
of B Unit
Cutting Units
Fold Square Diagonally and
Place Fold on This Line
A
1"
1 ½"
2"
2 ½"
3"
3 ½"
4"
4 ½"
5"
5 ½"
6"
2"
2 ½"
3"
3 ½"
4"
4 ½"
5"
5 ½"
6"
6 ½"
7"
Finished
Block Size
Unit A
1" 1 ½" 2" 2 ½" 3" 3 ½" 4" 4 ½" 5" 5 ½" 6"
2" x 2 ¼" 2 ¼" x 2 ¾" 2 ½" x 3 ¼" 2 ¾" x 3 ¾" 3" x 4 ¼" 3 ¼" x 4 ¾" 3 ½" x 5 ¼" 3 ¾" x 5 ¾" 4" x 6 ¼" 4 ¼" x 6 ¾" 4 ½" x 7 ¼"
Finished
Block Size
Cut 2
Unit B
Must be Mirror Image
Place RST, Yield (2) L and (2) R
Align Left Edge of Rectangle
Cutting Units
B
Kitty Cornered
Designed by
Deb Heatherly
B
Cut 2
Repeat process for second square.
Open and press unit A.
1 2
3
Referring to cutting chart B, place the
rectangles right sides together.
(NOTE: It is important that you place them right sides
together in order to make mirror image B units.)
Align the left side and the top left
corner of the rectangles with the
Step 2 B unit line on the tool.
Cut.
Trim 1Step 3
Trim 2 Step 1
Step 2
CGRDH5
Clip Corner
of B Unit
Cutting Units
Fold Square Diagonally and
Place Fold on This Line
A
1" 1 ½" 2" 2 ½" 3" 3 ½" 4" 4 ½" 5"
5 ½" 6"
2" 2 ½" 3" 3 ½" 4" 4 ½" 5" 5 ½" 6"
6 ½" 7"
Finished
Block Size
Unit A
1"
1 ½"
2"
2 ½"
3"
3 ½"
4"
4 ½"
5"
5 ½"
6"
2" x 2 ¼"
2 ¼" x 2 ¾"
2 ½" x 3 ¼"
2 ¾" x 3 ¾"
3" x 4 ¼"
3 ¼" x 4 ¾"
3 ½" x 5 ¼"
3 ¾" x 5 ¾"
4" x 6 ¼"
4 ¼" x 6 ¾"
4 ½" x 7 ¼"
Finished
Block Size
Cut 2
Unit B
Must be Mirror Image
Place RST, Yield (2) L and (2) R
Align Left Edge of Rectangle
Cutting Units
B
Kitty Cornered
Designed by
Deb Heatherly
B
Cut 2
Trim 1Step 3
Trim 2 Step 1
Step 2
CGRDH5
Clip Corner
of B Unit
Cutting Units
Fold Square Diagonally and
Place Fold on This Line
A
1"
1 ½"
2"
2 ½"
3"
3 ½"
4"
4 ½"
5"
5 ½"
6"
2"
2 ½"
3"
3 ½"
4"
4 ½"
5"
5 ½"
6"
6 ½"
7"
Finished
Block Size
Unit A
1" 1 ½" 2" 2 ½" 3" 3 ½" 4" 4 ½" 5" 5 ½" 6"
2" x 2 ¼" 2 ¼" x 2 ¾" 2 ½" x 3 ¼" 2 ¾" x 3 ¾" 3" x 4 ¼" 3 ¼" x 4 ¾" 3 ½" x 5 ¼" 3 ¾" x 5 ¾" 4" x 6 ¼" 4 ¼" x 6 ¾" 4 ½" x 7 ¼"
Finished
Block Size
Cut 2
Unit B
Must be Mirror Image
Place RST, Yield (2) L and (2) R
Align Left Edge of Rectangle
Cutting Units
B
Kitty Cornered
Designed by
Deb Heatherly
B
Cut 2
Align the B units with the Step 3
lines on the tool. Trim o the tip.
4
5
A
B
CUTTING A
CUTTING B
B

Summary

Cutting Unit A

Cut and Fold Squares

Cut two squares from the chart and fold them diagonally.

Align and Cut

Place the folded square tip on the tool and align the folded edge for cutting.

Complete Unit A

Repeat the process for the second square and press the unit open.

Cutting Unit B

Prepare and Align Rectangles

Place rectangles right sides together and align with the specified tool line.

Trim B Units

Align the B units with the tool lines and trim off the tip.

Ready for Sewing

Indicates the completion of B units, ready for the next construction step.

Sewing Units

Attach First B Unit

Sew the first B unit onto the A unit from the clipped corner with 1/4" seam allowance.

Attach Opposite B Unit

Align and sew the opposite B unit onto the A unit from the clipped corner.

Repeat Unit Assembly

Repeat the sewing process with the second set of A and B units.

Trimming Units

Trim Corners

Trim the small tip of the block using the tool's 'V' and diagonal line.

Align and Trim to Size

Align trimmed edges with size lines on the tool and trim the block.

Yield

Confirms that the process yields two perfect units.

Overview

1. Function Description
2. Usage Features
3. Cutting Process
4. Sewing Process
5. Trimming Process
6. Maintenance Features

The Kitty Cornered tool, identified as Item #CGRDH5, is a specialized quilting ruler designed by Deb Heatherly, intended to simplify the cutting and sewing of specific quilt units, particularly those involving triangles and rectangles to create cornered blocks. This tool is part of the Creative Grids line, known for its non-slip feature, which enhances precision and ease of use during the quilting process.

Function Description:

The primary function of the Kitty Cornered tool is to facilitate the accurate cutting of fabric pieces for two distinct units, Unit A and Unit B, which are then sewn together to form a cornered block. The tool provides clear guidelines and markings that assist quilters in achieving precise cuts and seams, ultimately leading to well-formed and consistent quilt blocks. It streamlines the process of creating angled units, which can often be challenging to cut and assemble accurately without specialized tools.

Usage Features:

The Kitty Cornered tool is designed for a two-stage process: cutting and sewing, followed by trimming.

Cutting Process:

1. Cutting Unit A:

   • Initial Cut: The process begins by cutting two squares of fabric according to the cutting chart for Unit A provided on the tool. These squares are the foundational pieces for Unit A.
   • Folding and Pressing: After cutting, each square is folded diagonally and pressed. This creates a crisp diagonal line that is crucial for the subsequent steps.
   • Tool Alignment (Step 1): The folded square is then placed on the Kitty Cornered tool. The tip of the folded square is aligned with the corner of the "Step 1" section on the tool. Concurrently, the folded edge of the fabric must be aligned precisely with the dashed line indicated on the tool. This alignment ensures that the subsequent cut will yield the correct shape for Unit A.
   • Cutting: Once aligned, the fabric is cut using the tool's edge. This process is repeated for the second square.
   • Opening and Pressing: After cutting, the fabric pieces are opened and pressed, forming the completed Unit A. The non-slip feature of the Creative Grids ruler helps keep the fabric in place during cutting, minimizing slippage and ensuring accuracy.

2. Cutting Unit B:

   • Initial Placement: For Unit B, two rectangles of fabric are placed right sides together. This step is critical because it ensures that when the units are cut, they will yield mirror-image B units, which are essential for proper assembly of the final block.
   • Tool Alignment (Step 2): The stacked rectangles are then aligned with the "Step 2 B unit" line on the tool. Specifically, the left side and the top left corner of the rectangles are matched with the corresponding markings on the tool. This precise alignment is key to cutting the correct shape for Unit B.
   • Cutting: The fabric is cut along the tool's edge.
   • Tip Trimming (Step 3): After the initial cut for Unit B, the units are aligned with the "Step 3" lines on the tool. This step involves trimming off the tip of the Unit B pieces. This "clip corner" action is a design feature that aids in accurate seam alignment during the sewing phase, preventing bulk and ensuring a clean finish.

Sewing Process:

1. First B Unit Attachment:

   • Placement: With right sides together, the first Unit B is placed onto Unit A as shown in the provided diagrams. The clipped corner of Unit B is a key indicator for placement.
   • Sewing: Sewing begins from the clipped corner, maintaining a 1/4-inch seam allowance from the edge. The clipped corner helps in starting the seam accurately and prevents the fabric from shifting.
   • Pressing: After sewing, the seam is pressed away from Unit A.

2. Second B Unit Attachment:

   • Placement: The opposite Unit B is then aligned, again using its clipped edge for proper placement.
   • Turning and Sewing: The entire unit is turned over, and sewing commences from the edge with the clipped corner. This ensures that both B units are attached symmetrically.
   • Pressing: The seam is pressed away from Unit A.
   • Repetition: This sewing process is repeated for the second set of A and B units, yielding two "perfect units" ready for trimming.

Trimming Process:

The trimming stage is crucial for achieving the final desired size and shape of the block, ensuring all units are consistent.

1. First Corner Trim:

   • Alignment: The small tip of the block is trimmed first. This is done by placing the "V" marking on the tool's "trim corner" onto the tip of the block. Simultaneously, the diagonal line on the tool must be aligned with the opposite corner of the block. This dual alignment ensures a precise and symmetrical trim.
   • Trimming Sides: After aligning, two sides of the block are trimmed.

2. Second Corner Trim (Rotation):

   • Rotation: The block is then rotated.
   • Alignment for Size: The trimmed edges are aligned with the lines on the tool corresponding to the desired finished block size. It is essential to ensure that the diagonal line on the tool passes through the center of the small tip of the block. This step verifies that the block is square and accurately sized.
   • Trimming Remaining Sides: The remaining two sides are trimmed.
   • Repetition: This trimming process is repeated for the second block, resulting in two perfectly trimmed units.

The non-slip backing of the Creative Grids ruler is a significant usage feature throughout all these steps. It prevents the ruler from sliding on the fabric, which is particularly important during precise cutting and trimming operations, thereby reducing errors and increasing efficiency. The clear markings and step-by-step guidance on the tool itself, along with the accompanying instructions, make it accessible for quilters of various skill levels. The design of the tool, with its specific sections for different cutting steps, simplifies complex angled cuts into manageable, repeatable actions.

Maintenance Features:

As a quilting ruler, the Kitty Cornered tool requires minimal maintenance.

• Cleaning: The tool should be kept clean to ensure visibility of its markings. A soft cloth and mild soap and water can be used to wipe away any fabric dust, lint, or residue that may accumulate during use. Avoid abrasive cleaners or harsh chemicals that could scratch the surface or degrade the printed markings.
• Storage: Store the ruler flat to prevent warping. Keeping it in a designated ruler holder or a drawer where it won't be bent or subjected to heavy objects will help maintain its integrity and accuracy over time. Protecting it from direct sunlight and extreme temperatures can also prolong its lifespan.
• Inspection: Periodically inspect the ruler for any signs of damage, such as cracks, chips, or faded markings. While Creative Grids rulers are durable, any significant damage could affect cutting accuracy. If the non-slip surface begins to wear down, its effectiveness may diminish, although this is generally a long-term concern with proper care.

In summary, the Kitty Cornered tool (Item #CGRDH5) is a specialized, non-slip quilting ruler designed to simplify the creation of cornered quilt blocks by providing precise guides for cutting, sewing, and trimming Unit A and Unit B components. Its intuitive design and clear markings make it an invaluable asset for quilters seeking accuracy and efficiency in their projects.

Creative Grids Kitty Cornered Specifications