Creative Live! Cam Vista IM User Manual

1
Congratulations!
Thank you for purchasing a Creative Live!
®
Cam Vista IM! Read on to learn
how to get started with your new Live! Cam! To get the most out of your Live!
Cam, also read the comprehensive User’s Guide on your Installation and
Applications CD (see “More Information” on page 6).
Refer to the figure on the cover and match the numbers with those below to
learn more about your Live! Cam.
1. Focus ring
Adjusts the view focus. Point
the lens toward your subject
and then rotate this ring in a
clockwise or counterclockwise
motion until the image is in
focus.
2. Power LED
Lights up when your Live! Cam
is connected to your
computer's USB port and
streaming video.
3. Hinged lever
Mounts your Live! Cam on a
Liquid Crystal Display (LCD)
panel.
4. USB cable
Connects to your computer’s
USB port.
Live! Cam Vista IM_Multi CLE.book Page 1 Monday, April 24, 2006 2:08 PM

Creative Live! Cam Vista IM Specifications

General

Resolution	640 x 480
Frame Rate	30 fps
Interface	USB 2.0
Lens	Fixed focus
Microphone	Built-in
Sensor	CMOS
Focus Type	Fixed
Compatibility	Windows
Max. Image Resolution	1.3MP (software enhanced)

Summary

Installing Drivers and Applications

Getting Started

Guides the initial setup and installation process for the device.

Connecting Your Live! Cam

Step 2: Connecting Your Live! Cam

Details on how to physically connect the camera to the computer.

Verifying the Installation

Step 3: Verifying the Installation

Instructions for confirming the successful installation of the device.

Using Your Creative Live! Cam

Taking a Photo/Video

Explains how to capture photos and record videos with the webcam.