Creative WP-350 - Headset Quick Start Guide; Charging the Headset; Pairing New Bluetooth Devices; Playback from Audio Devices

EN
Thank you for selecting Creative WP-350 wireless
headset. This documentation aims to guide you in
making full use of the headset. Fully charge the headset
before first use. Then you need to “pair” the headset once
with your Bluetooth audio or mobile device before enjoying
subsequent automatic connection.
Charging headset
• Connect the Left earcup to your laptop or computer
using the supplied USB cable
• On the Left earcup, the indicator lights up in Red.
 Whenfullycharged,thisindicatorturnsGreen
• You can listen and operate the headphones while
charging
Pairing new Bluetooth devices
• PressandholdtheMultifunctionbuttonformorethan5
 secondsontheRightearcupuntiltheindicatorlightsup
in Blue and blinking rapidly
• Turn on Bluetooth search function on your audio or
mobile device
• Select“CreativeWP-350Headset”andifpromptedfora
 Passcode,keyin“0000”
• Once paired, the Blue indicator on the Right earcup
blinks slowly
• Note that when pairing with a computer,connect the
 headset as a Hands-free Audio or Headset device
 instead of a Stereo Audio device in order to make
use of the microphone function. If microphone function
 isnotneeded,itisrecommendedtoconnectasaStereo
 Audiodeviceforbetterplaybackperformance.Certain
Bluetooth solution detects the application that you are
 usingandconguresthemicrophoneautomatically.You
are recommended to update your computer’s Bluetooth
drivers to the latest.
Playback from audio devices
• TurnonBluetoothfunctiononyourpairedaudiodevice
• Press and hold the Multifunction button on the Right