EasyManua.ls Logo

Creative WP-450 - Light Indicator Functions; Connector; Port Functions; Technical Specifications

Creative WP-450
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Light
Indicator
Function
5. Right
earcup light
indicator
Green and blinks slowly: automatically
searching and attempts to connect to the
last paired device.
Blue and blinks slowly: connected to a
paired device.
Blue and blinks rapidly: in pairing mode
and is ready to pair with a new device.
Blue and flashes twice: muting microphone
during a call.
Red and blinks twice: powering off the
headset.
Red and blinks slowly: low battery level,
charge the headset soonest. This is
accompanied by a beep tone every 2
minutes.
6. Left
earcup light
indicator
Red: charging headset.
Green: headset fully charged.
Connector /
Port
Function
7.
Micro-USB
charging
connector
Use the supplied USB cable for charging
the headset via a laptop or computer.
8.Invisible
Microphone
Noise suppression microphone for crystal
clear communications
Technical Specifications:
Driver: 34mm Neodymium magnet
Frequency Response: 18Hz ~ 22kHz
Impedance: 32ohms
Wireless Technology:
Bluetooth
2.1 + EDR
(Enhanced Data Rate)
Bluetooth
Profiles: A2DP (Wireless stereo
Bluetooth
),
AVRCP (
Bluetooth
remote control), HFP (Hands-free
profile), HSP (Headset profile)
Audio Codec: apt-X, SBC, FastStream
Operating Frequency: 2402 ~ 2480MHz
Operating Range: Up to 10m / 33ft
Power Supply: Rechargeable Lithium Ion battery, 3.7V,
240mAh
Charge via USB: 5VDC, 500mA
Charge / Playback / Talk time: 1 hour / 8 hours / 9 hours
Net Weight: 114g / 4oz

Other manuals for Creative WP-450

Related product manuals