To Next PageTo Next Page
Need help?Do you have a question about the Creator CRT-591-M and is the answer not in the manual?
Lists key functions like card dispense, retract, empty detection, communication, and card reading/writing capabilities.
Details on power supply voltage, static, normal, and peak current consumption.
RS-232C communication method and support for multi-communication.
Covers card read/write types, dimensions, loading capacity, and pre-empty detection.
Specifies operating/storage conditions, MTBF, and environmental standards compliance.
Details compliance with IC, RF, SIM card standards, online download, and RoHS.
Details on card read/write reliability, dispensing accuracy, speed, and machine lifecycle.
Explains the structure and meaning of the CRT-591 model designation and its variants.
Lists included accessories such as block parts, card boxes, and power/RS232 cables with their specifications.
Details the wiring for the RS232 serial port cable connecting to a PC DP9PIN socket.
Identifies and illustrates the connections and sensors on the machine's main board.
Diagram showing the physical locations of various photoelectric sensors on the machine.
Illustrates the specific positions for card holding, IC card operation, and RF card operation.
Table mapping DIP switch settings (1-4) to unit addresses (ADDR) for device configuration.
Instructions for setting unique addresses for devices in multi-communication setups.
Specifies default card thickness, acceptable range, and considerations for embossed cards.
Details cleaning procedures for mechanisms, sensors, card contacts, and transportation rolls.
Advises on power disconnection, DIP settings, warm plugging, machine cleanliness, and card orientation.
Lists references for DLL, DLL specifications, and communication protocols.
Provides overall dimensions, detailed measurements, and dimensional tolerance standards.
General| Brand | Creator |
|---|---|
| Model | CRT-591-M |
| Category | Industrial Equipment |
| Language | English |
