To Next PageTo Next Page
Need help?Do you have a question about the Creda TPRIII150E and is the answer not in the manual?
Basic safety steps for using electrical heaters to reduce risks of fire, shock, and injury.
Instructions to avoid overheating and fire risks by not covering or obstructing the heater.
Details on qualified electrician installation, wiring regulations, and fused spur connection.
Precautions for use by children, supervision needs, and battery warnings.
Key performance data including heat output, dimensions, and auxiliary electricity consumption.
Emphasis on using the supplied wall bracket and correct orientation for installation.
Detailed steps for removing the bracket, fixing it to the wall, and attaching the heater.
Flexible scheduling with four programmable time slots per day.
Steps to select and activate the User Timer mode.
Instructions for re-programming factory default timer modes for each day.
Adjusting the start time, end time, and temperature for Programme 1.
Adjusting start times, end times, and temperatures for Programmes 2, 3, and 4.
Heater anticipates and starts heating early to reach target temperature at the set time.
Feature that reduces power when detecting a sudden drop in room temperature.
Restoring all settings to factory default presets via a menu option.
Steps for safely replacing the coin cell battery in the controls.
Safe methods for cleaning the heater exterior and releasing it from the wall bracket.
Basic safety steps for using electrical heaters to reduce risks of fire, shock, and injury.
Instructions to avoid overheating and fire risks by not covering or obstructing the heater.
Details on qualified electrician installation, wiring regulations, and fused spur connection.
Precautions for use by children, supervision needs, and battery warnings.
Key performance data including heat output, dimensions, and auxiliary electricity consumption.
Emphasis on using the supplied wall bracket and correct orientation for installation.
Detailed steps for removing the bracket, fixing it to the wall, and attaching the heater.
Flexible scheduling with four programmable time slots per day.
Steps to select and activate the User Timer mode.
Instructions for re-programming factory default timer modes for each day.
Adjusting the start time, end time, and temperature for Programme 1.
Adjusting start times, end times, and temperatures for Programmes 2, 3, and 4.
Heater anticipates and starts heating early to reach target temperature at the set time.
Feature that reduces power when detecting a sudden drop in room temperature.
Restoring all settings to factory default presets via a menu option.
Steps for safely replacing the coin cell battery in the controls.
Safe methods for cleaning the heater exterior and releasing it from the wall bracket.
General| Power Output | 1500 W |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Timer | No |
| Frost Protection | Yes |
| Safety Features | Overheat Protection |
| Dimensions | 430 mm |
| Heater Type | Panel |
